Hitachi RAC-18WPB, Руководство по обслуживанию

Страница: 28 / 148

– 9 –
ENGLISH
COOLING OPERA
TION
Use the device for cooling when the outdoor temperature is -10~
43°C.
If indoors humidity is very high (80%), some dew may form on the air outlet grille of the indoor unit.
Press the MODE selector button so that the display indicates (COOL).
■
As the settings are stored in the memory of the remote controller, you only have to press the
(START/STOP) button next time.
■
During AUTO fan, the fan speed automatically changes as below:
●
When the difference between room temperature and setting tem- perature is large, fan starts to run at HI speed.
●
After room temperature reaches the preset temperature, fan speed will be changed to lower speed to obtain optimum room temperature condition for natural healthy cooling.
ST
AR
T
ST
OP
1 2
3
Set the desired FAN SPEED with the
(FAN SPEED) button (the
display indicates the setting).
(AUTO)
(HIGH)
(MED)
(SILENT)
(LOW)
Set the desired room temperature with the TEMPERATURE buttons (the display indicates the setting). The temperature setting and the actual room temperature may vary depending on conditions. Press the
(START/STOP) button. Cooling operation starts with a
beep. Press the button again to stop operation. The cooling function does not start if the temperature setting is higher than the current room temperature (even though the
(OPERATION) lamp lights).
The cooling function will start as soon as user set the temperature below the current room temperature.
– 10 –
FAN OPERA
TION
AUTO SWING OPERA
TION
User can use the device simply as an air circulator.
VER
TICAL SWING
HORIZONT
AL SWING
ST
AR
T
ST
OP
1
2
Press the MODE selector so that the display indicates (FAN).
Set the desired FAN SPEED with the
(FAN SPEED) button (the
display indicates the setting).
(HIGH)
(MED)
(LOW)
(SILENT)
Press the
(START/STOP) button. Fan operation starts with
a beep. Press the button again to stop operation.
■
T
o star
t
V
er
tical A
uto Swing
■
T
o star
t Horizontal A
uto Swing
■
T
o cancel
V
er
tical A
uto Swing
■
T
o cancel Horizontal A
uto Swing
●
Press
(AUTO SWING (VERTICAL)) button. The de
ector(s) will start
to swing up and down.
is displayed on the LCD.
●
Press
(AUTO SWING (HORIZONTAL)) button. The de
ectors will
start to swing right and left.
is displayed on the LCD.
●
Press
(AUTO SWING (VERTICAL)) button again. The de
ector(s)
will stop in the current position.
disappeared from the LCD.
●
Press
(AUTO SWING (HORIZONTAL)) button again. The de
ectors
will stop in the current position.
disappeared from the LCD.
NO
TE
●
During cooling and dehumidifying operation, do not keep the de
ectors swinging or in the lower position
(in the case of vertical auto swing) for a long time. It may cause dew condensation on the de
ectors.
28