Hitachi RAC-18WPB, Руководство по обслуживанию

Страница: 26 / 148

– 5 –
ENGLISH
MODE SELECTOR AUTO HEAT DEHUMIDIFY COOL FAN FAN SPEED AUTO SILENT LOW MED HIGH START / STOP ECO
Precautions f
or Use
●
Do not put the remote controller in the following places. ●
Under direct sunlight.
●
In the vicinity of a heater.
●
Handle the remote controller carefully. Do not drop it on the
oor, and protect it from water.
●
Once the outdoor unit stops, it will not restart for about 3 minutes (unless you turn the power switch off and on or unplug the power cord and plug it in again). This is to protect the device and does not indicate a failure.
●
If you press the MODE selector button during operation, the device may stop for about 3 minutes for protection.
PO
WERFUL Button
Use this button to set the POWERFUL mode. (
p. 11)
INFORMA
TION Button
(
p. 26)
ONE
T
OUCH CLEAN Button
(
p. 16)
ON / OFF
TIMER setting Buttons
(
p. 17)
MODE selector Button Use this button to select the operating mode. Every time you press this button, the mode will change from
(AUTO)
➞
(HEAT)
➞
(DEHUMIDIFY)
➞
(COOL) and
➞
(FAN)
cyclically. SILENT Button Use this button to set the SILENT mode. (
p. 12)
A
UT
O SWING (V
er
tical) Button
Controls the angle of the horizontal air de
ector. (
p. 10)
A
UT
O SWING (Horizontal) Button
Controls the angle of the vertical air de
ector. (
p. 10)
WEEKL
Y
TIMER setting Buttons
(
p.
)
LEA
VE HOME Button
(
p. 15)
NAMES AND FUNCTIONS OF REMOTE CONTROLLER
ECO SLEEP
TIMER Button
Use this button to set the ECO sleep timer. (
p
.
18)
FAN POWERFUL SILENT INFO SLEEP TIMER AUTO SWING (VERTICAL) AUTO SWING (HORIZONTAL) LEAVE HOME CLEAN DAY PROGRAM NO.
ON / OFF TIMER TIME OK DELETE COPY / PASTE CANCEL SEND CLOCK
20
– 6 –
AUTOMA
TIC OPERA
TION
The device will automatically determine the mode of operation, HEAT or COOL depending on the current room temperature. The selected mode of operation will change when the room temperature varies. However, the mode of operation will not change when indoor unit is connected to multi type outdoor unit. V
ARIOUS FUNCTIONS
■
Auto Restart Control
●
If there is a power failure, operation will be automatically restarted when the power is resumed with previous operation mode and air
ow direction.
(As the operation is not stopped by remote controller.)
●
If you intend not to continue the operation when the power is resumed, switch off the power supply. When you switch on the circuit breaker, the operation will be automatically restarted with previous operation mode and air
ow direction.
Note:
1. If you do not require Auto Restart Control, please consult your sales agent. 2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.
■
As the settings are stored in the memory of the remote controller, you only have to press the
(START/STOP) button next time.
Press the MODE selector button so that the display indicates the (AUTO) mode of operation.
●
When AUTO has been selected, the device will automatically determine the mode of operation, HEAT or COOL depending on the current room temperature. However the mode of operation will not change when indoor unit is connected to multi type outdoor unit.
●
If the mode automatically selected by the unit is not satisfactory, manually change the mode setting (HEAT, DEHUMIDIFY, COOL or FAN).
Press the
(FAN SPEED) button to select AUTO, HIGH, MED, LOW
or SILENT.
Press the
(START/STOP) button.
Operation starts with a beep. Press the button again to stop operation. Set the desired room temperature with the TEMPERATURE buttons (the display indicates the setting). The temperature setting and the actual room temperature may vary depending on conditions.
ST
AR
T
ST
OP
1 2 3
Set the desired FAN SPEED with the
(FAN SPEED) button (the
display indicates the setting).
(AUTO)
(HIGH)
(MED)
(SILENT)
(LOW)
26