manualshive.com logo in svg

Hitachi RAC-10EX9, Руководство пользователя

Поделиться
Скачать
Hitachi RAC-10EX9 Скачать руководство пользователя страница 29

– 29 –

ENGLISH

1

Take out the air filter

●

Hold both sides of the front panel and lift up.

CAUTION

●

Do not wash with hot water at more than 40°C. The filter may shrink.

●

When washing it, shake off moisture completely and dry it in the shade; do not expose it directly to
the sun. The filter may shrink.

●

Do not operate the unit without filter. Fault may occur if you continue.

!

CLEANING PROCEDURE

Front Panel

Air Filter

Tub

Air Exchanger
Filter

Air Duct Filter

Air Exchanger
Small Filter

2

Take out the air exchanger filter

●

Pull the left side of the clip lock forward the
installer, hold the handle of the filter and pull follow
the arrow direction in the diagram.

3

Take out the air duct filter

●

Pull out the air duct filter base on the arrow
direction on the diagram.

4

Take out the air exchanger small filter

●

Lift up the handle of the filter, then pull out the
filter follow the arrow direction.

5

Vacuum dust from the air filter using vacuum cleaner.
If there is too much dust, wash the filter with
detergent and rinse it thoroughly. After that, dry it in
the shade.

6

Reverse the above procedure to assemble back all
the filter.

7

Please clean the heat exchanger annually, use soft
tooth brush and vacuum cleaner to clean, but avoid
the fin from broken.

Содержание RAC-10EX9





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды