manualshive.com logo in svg

Hitachi RAC-10EX9, Руководство пользователя

Поделиться
Скачать
Hitachi RAC-10EX9 Скачать руководство пользователя страница 18

– 18 –

TEMPERATURE INDICATOR

●

Indoor and Outdoor Temperature indicates on remote
controller during Operation:

During operation mode, press “        ” button.

●

Air-cond unit will make a ‘beep’ sound to indicate
signal received. Around 2 seconds after hearing
the sound, unit will sends a data signal to remote
controller. Point the remote controller to the centre
part of the air-cond. After the remote controller
received the signals, it will display:

Press again the “        ” button.

●

After the remote controller received signal from
air-cond, it will display the setting temperature.

If the content on the display blinking as shown on
the right figure, it means that the remote controller
did not receive any signal. Point the remote controller
to the centre of the air-cond again and press the
“        ” button.

●

There is no function when pressing the “      ” button during
operation stop mode.

●

Below figure shows the temperature sensor locations to
measure the indoor and outdoor temperature.

●

The measured value is the approximately value. There is
a certain differential between the actual and measured
temperature. The differential will be larger especially when
the operation is just begin or when the compressor stop
after reaching the setting temperature.

1

2

3

     

Outdoor
temperature
(Temperature
indicated range.
Indoor -
10°C-49°C
Outdoor -
30°C-49°C)

Indoor
temperature

Outdoor temperature
sensor portion

Indoor temperature
sensor portion

AIR PURIFIER OPERATION

●

Press the     button, to execute the air purifier operation.

●

Air purifier operation is an operation in which the air-cond fan motor and air exchanger fan motor
operate simultaneously. Air exchanger fan will suck the air and pass through the air exchanger filter,
UV-LED and blow out from the air-cond.

●

Operation lamp and air purifier lamp will on.

●

The blue indication lamp on the fresh air nozzle will on.

●

The fan speed for air-cond can be set by remote controller.

STOP :

Press the     (START/STOP) button or     button to cancel.
(During COOL and DEHUMIDIFY operation)

When setting air exchanger operation during air purifier operation, the air purifier
operation will be cancelled temporary. After the air exchanger operation is stopped,
air purifier operation will continue.

CAUTION

!

Содержание RAC-10EX9





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды