6
To cancel the fine adjustment of the temperature.
Touch “ Temp. Control ” button for 5 seconds until “PiPi!” sound is heard and you can set temperature by normal step (5 steps)
●
This function is subjected to change according model type.
Touch “ Temp. Control ”
for 5 seconds until 1 “PiPi!”
sound is heard.
●
Factory setting, the adjustment temperatrure by normal step (5 steps).
PiPi!
NOTICE
1. Keep touching "Select"
for 5 seconds until
"Peep!" sound is heared.
There is not sound when
touching any button
(deactive door alarm sound).
1. Keep touching "Select"
for 5 seconds until "PiPi!" sound
is heared.
There is sound when touching
any button
(active door alarm sound).
Door Alarm and ECO Alarm Function(Only Refrigerator Compartment)
If the door is left open for more than 1 minute, the alarm system
will inform the user by the sound and digital display.
●
Door Alarm: Informs by PeepPeepPeep sound.
●
Eco Alarm Display: Indicates the door opening state on the control panel.
After 1 minute
After 2 minute
After 3 minute
PeepPeepPeepPeepPeep
Peep continuously
PeepPeepPeep
All LED on display-
are Flashing
To Disactivate Alarm and Sound
To re-activate Alarm and Sound
(There must set more than 45 seconds before unplug the power or power failure. otherwise the temperature display shown as before setting.)
●
Factory setting, the alarm and sound are set “ON”
●
If the Door Alarm, Eco Alarm Display and each button operation sound have been deactivated, The refrigerator will still set
the alarm and sound to “OFF” even though a power failure or when unplugging and reconnecting the power plug.
NOTICE
2
Other Functions (Continuation)
3
4
Quick Freezing/Quick Cooling
and closing the doors not to have a temperature rise of the refrigerator compartment.
● During defrost period,”Quick Freezing” and "Q
u
ick cooli
ng" operation will stop even though the lamp is on. After finishing
defrost period, the operation will restart automatically.
Quick Cooling :
When you want to cool food or drinks quickly, use this function
● Please note “Quick Freezing” and "Quick cooling" mode
will be released after power cut off or unplug.
When you want to freeze food or make ice quickly, use this function
● During "Quick Freezing", priority cooling of the
freezer c
ompartment will be done, Thus, try to avoid unnesessary opening
Quick Freezing :
NOTICE
Pi!
operation, lamp light is on.
Touch “First time”
for Start Quick Freezing
After 2 hours (approx.) Quick freezing
operation will be finished, lamp light is off.
1
Quick Cooling
Quick Freezing
2
operation, lamp light is on.
Touch “Second time”
for Start Quick Cooling
Pi!
After 90 minutes (approx.) Quick cooling
operation will be finished, lamp light is off.
Quick Cooling
Quick Freezing
3
Pi!
for start two function operation,
Touch “Third time”
lamp both light is on.
Quick Cooling
Quick Freezing
4
Pi Pi!
Touch “Fourth time”
for stop two function operation
lamp both light is off.
Quick Cooling
Quick Freezing
Put food on the quick cooling
“Quick cooling” corner is
located on the upper part of
the refrigerator compartment.
“Quick Cooling” is more
effective if food is place near
the back wall of the
refrigerator compartment.
Before start Quick Cooling
You can prevent mischief of all the buttons on the control panel caused by children.
Lock
2
Peep!
1,2,..5 Seconds
Pi Pi!
Lock Hold 5”
Energy Saving
1
Peep!
1,2,..5 Seconds
Peep!
Touch “Lock”
for 5 seconds
(“Lock” light is on)
Lock Hold 5”
Energy Saving
To stop this function, touch
“Lock” for 5 seconds again
(“Lock” light is off)
5
