58
按鍵鎖
（按
3
秒）
■
When you want to sound the alarm again
Push the
急冷凍
button and
hold it for about 3 seconds
until "2 beeps" sound.
The displays will be returned to the
original state when the setting is
completed.
■
When you want to stop the alarm
Push the
急冷凍
button and
hold it for about 3 seconds
until "2 beeps" sound.
The displays will be returned to the
original state when Alarm stops.
[ eco OPERATION INDICATOR LAMP]/DOOR ALARM/LOCK FUNCTION OF THE PANEL FOR OPERATION
[“eco” Operation indicator lamp]
Indicates the operation mode of the refrigerator automatically. This will be illuminated while it
is operating with low electric power consumption such as Frost Recycle Cooling and others.
If the door remains open for more than 1 minute, the alarm sounds as shown in the table
below and the LED lamp on the Control Panel fl ashes.
When this indicator lamp (Lock on the panel for operation) is illuminated, any other button will not be
actuated by pushing it. This function prevents the wrong operation or mischief of a small child.
[“eco” operation indicator lamp] can be turned off when you feel uneasy at night, etc.
The Door Alarm can be stopped.
■
How to turn off the
indicator lamp
Push the
真空開
+1˚C (Vacuum
Compartment Chiller) for about
3 seconds until the eco
indicator lamp starts to fl ash.
eco operation indicator lamp is turned
off and the setting is completed.
Continue to push the
冷藏
(Cooling) button for 3 seconds
and more until it beeps twice,
and then you can select
設定
(Setting) or
解除
(Release) of
the Lock function on the panel
for operation.
When setting the Lock as On
on the panel for operation
When releasing the Lock function
on the panel for operation
■
How to return
Push the
真空開
+1˚C (Vacuum
Compartment Chiller) for about
3 seconds until the eco
indicator lamp is illuminated.
eco operation indicator
lamp will be turned on or off,
depending on the current
operation mode.
・・・
・・・
2 beeps
Long beep
2 long beeps
…
The indicator
lamp blinks
Indicator
lamp is on
About
3 seconds
About
3 seconds
Push this button and hold it
for 3 seconds
Push this button and hold it
for 3 seconds
●
If eco indicator lamp isn’t illuminated, check the following things.
・
Is the eco operation indicator lamp set as Off?
→
Perform the above-mentioned procedure for how to return.
・
It will not be illuminated just after purchasing the refrigerator, or when so many foods are stored or when the number
of opening/closing the door is large, because the compressor needs to operate on high speed.
→
Open/close the
door quickly or minimize the number of opening/closing the door.
・
When the quick cooling functions (
急冷凍
(Quick Freezing),
急冷蔵
(Quick Cooling)) work, it will be illuminated
after the quick cooling functions fi nish and the operation of the refrigerator gets stable.
●
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the eco operation indicator lamp is illuminated.
●
The fl ashing of the character displayed on the Control Panel for operation will be stopped where the Door Alarm is stopped. The buzzer
does not sound, too.
●
The Door Alarm is set as On at the time of installation.
●
When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
●
Check the temperature setting of the Refrigerator Compartment after the setting fi nishes.
The Door Alarm is available for the Refrigerator
Compartment, Ice Compartment and Lower
Freezer. (It is not available for the Upper Freezer
and Vegetable Compartment.)
Notice
Notice
Notice
Door Alarm
How to set the Lock function of the panel for operation
Duration when door is open
1 minute
2 minutes
Longer than 3 minutes
Alarm sound
3 long beeps
5 long beeps
It keeps continuously sounding.
Control Panel on the Refrigerator Compartment Door
Flashing
Flashing
Flashing
1 beep
2 beeps
Indicator
lamp is on
About
3 seconds
Push this button and hold it for 3 seconds
Turn off this display.
Turn on this display.
・・・
2 beeps
Indicator
lamp is on
About
3 seconds
Push this button and hold it for 3 seconds
Push it for 3 seconds
and more
●
Perform the setting with all the doors closed.
Pg.38
Caution
