Hitachi PC-ALH, Инструкция по установке и эксплуатации

Страница: 9 / 30

ENGLISH
7. Attach the receiver kit in the following procedure.

Draw out the connecting cable from the pocket and connect the connecting cable and the wire of the receiver kit. After
connecting the cable, wrap the connector with the cover and fix them with a band.
Air panel
Corner pocket
Connecting cable
Receiver kit
Connecting cable
Band
Cover
Band

Hook the band on the rear side of the
receiver kit at the pin of the air panel
as shown bellow.
Pin
Band
 Hook L- shaped nail on the rear side of
receiver kit at the square hole of the air panel.
L-Shape hook
Hook (3 locations)
8. Hook other fixing nails (3 positions) at square holes of air panel.

NOTE:
When removing the receiver kit after installing the air panel.
a) The corner position of the receiver kit can
be lifted when a coin or a “-” shaped driver
is inserted into the dent part
 and twisted
downward. With  lifted, twist a coin or a
“-” shaped driver at the positions of  and
 , the whole receiver kit can be lifted.
b) After disconnecting the fixing nails (3
positions), slide the receiver kit in the arrow
direction
 , and remove the receiver kit.
INSTALLATION OF WIRELESS RECEIVER KIT




Dent part
Coin or a “-” Shaped driver
Lifting
PMML0174A_r0_11-07.indb 9 22/11/2007 12:49:37