Hitachi (M2-30ED, Руководство по обслуживанию

Страница: 20 / 80

20
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
6-4 Putting
in
batteries
• Use the batteries included in this product or two new batteries of the specified type: HITACHI MAXELL,
part number LR6 or R6P .
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus and minus terminals as indicated in the
remote control.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.
WARNING
Always handle the batteries with care and use them only as directed. Improper use may result in battery
explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environ-
ment.
• Be sure to use only the batteries specified. Do not use batteries of different types at the same time.
Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe a leakage of a battery, wipe out the flower and then replace a battery.
If the flower adheres your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.