Hitachi LQE550 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 99

background image

4 OPERATION

4-17

4.8 Installing and Starting Up the System

4.8.1 Installing

(1) Installing the S10mini CPU link system

To install the S10mini CPU link, you must execute the setup program that is stored in the
DISK1 folder on the S10mini CPU link system CD.
Double-click “setup.exe” that is stored in the DISK1 folder on the “S10mini CPU link
system CD.”    Since no window opens upon completion of installation, attach a shortcut to
the desktop as needed.
Click the    Start    button and choose [(All) Programs] – [Hitachi S10] – [CPU LINK
SYSTEM] – [CPU LINK SYSTEM] from the [Start] menu on the Windows® screen.    Click
and hold the right mouse button on the [CPU LINK SYSTEM] and move the pointer to the
desktop.    Then, choose [Copy Here] from the pop-up menu.

NOTICE

Before installing the S10mini CPU link system, be sure to exit all the currently
open Windows®-based programs.    Do not forget to exit anti-virus software and
other memory-resident programs.    If you install the CPU link system without
exiting such programs, an error may occur during installation.    If such an error
occurs, first uninstall the CPU link system as directed in “4.8.2    Uninstalling,” exit
all the Windows®-based programs, and then install the S10mini CPU link system
again.

(2) Installing the S10V CPU link system

To install the S10V CPU link system, you must execute the setup program that is stored in
the S10V CPU link system DISK1 folder on the CD.
Double-click “setup.exe” that is stored in the DISK1 folder on the S10V CPU link system
CD.    Since no window opens upon completion of installation, attach a shortcut to the
desktop as needed.
Click the    Start    button and choose [(All) Programs] – [Hitachi S10V] – [S10V CPU LINK
SYSTEM] – [S10V CPU LINK SYSTEM] from the [Start] menu on the Windows® screen.
Click and hold the right mouse button on the [S10V CPU LINK SYSTEM] and move the
pointer to the desktop.    Then, choose [Copy Here] from the pop-up menu.

«
...
60
61
62
63
64
...
»

Содержание LQE550




































































































Отзывы:

Нет отзывов

Похожие инструкции для LQE550

Бренд: Tailfin Страницы: 4

Бренд: CAB Страницы: 10

Бренд: Balboa Страницы: 2

Бренд: NEC Страницы: 2

Бренд: IBS Страницы: 24

Бренд: Panasonic Страницы: 1

Bicycle Accessories

Бренд: Baby Jogger Страницы: 20

Бренд: Calsense Страницы: 6

Бренд: Harbor Freight Tools Страницы: 4

Бренд: Parker Страницы: 2

Бренд: Park Tool Страницы: 2

Бренд: ParaZero Страницы: 17

Бренд: Xantrex Страницы: 3

WORKCENTRE C2424

Бренд: Xerox Страницы: 2

Бренд: Viking Страницы: 5

Бренд: Atlas Copco Страницы: 88

Бренд: CAME Страницы: 2

Бренд: Omron Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды