Hitachi LQE550 Скачать руководство пользователя | Manualshive

Страница: 18 / 99

background image

WARRANTY AND SERVICING

Unless a special warranty contract has been arranged, the following warranty is applicable to this
product.

1. Warranty period and scope

Warranty period
The warranty period for this product is for one year after the product has been delivered to the
specified delivery site.

Scope
If a malfunction should occur during the above warranty period while using this product under
normal product specification conditions as described in this manual, please deliver the
malfunctioning part of the product to the dealer or Hitachi Engineering & Services Co., Ltd. The
malfunctioning part will be replaced or repaired free of charge. If the malfunctioning is shipped,
however, the shipment charge and packaging expenses must be paid for by the customer.

This warranty is not applicable if any of the following are true.

z

The malfunction was caused by handling or use of the product in a manner not specified in the
product specifications.

z

The malfunction was caused by a unit other than that which was delivered.

z

The malfunction was caused by modifications or repairs made by a vendor other than the

vendor that delivered the unit.

z

The malfunction was caused by a relay or other consumable which has passed the end of its

service life.

z

The malfunction was caused by a disaster, natural or otherwise, for which the vendor is not

responsible.

The warranty mentioned here means the warranty for the individual product that is delivered.
Therefore, we cannot be held responsible for any losses or lost profits that result from the
operation of this product or from malfunctions of this product. This warranty is valid only in
Japan and is not transferable.

2. Range of services

The price of the delivered product does not include on-site servicing fees by engineers. Extra
fees will be charged for the following:

z

Instruction for installation and adjustments, and witnessing trial operations.

z

Inspections, maintenance and adjustments.

z

Technical instruction, technical training and training schools.

z

Examinations and repairs after the warranty period is concluded.

z

Even if the warranty is valid, examination of malfunctions that are caused by reasons outside

the above warranty scope.

«
...
16
17
18
19
20
...
»

Содержание LQE550




































































































Отзывы:

Нет отзывов

Похожие инструкции для LQE550

AWPH360N - PAN/TILT HEAD

Бренд: Panasonic Страницы: 48

Бренд: Ecco Страницы: 9

Бренд: Ecco Страницы: 9

Бренд: Karma Страницы: 7

Бренд: LAZER Страницы: 6

Бренд: Navibe Страницы: 8

Бренд: YOKOGAWA Страницы: 15

Бренд: inventum Страницы: 32

NexXxoS CPX PHI-M01

Бренд: Alphacool Страницы: 3

Бренд: Datasensor Страницы: 4

Бренд: hc-cargo Страницы: 60

Бренд: Winsen Страницы: 6

Бренд: Oypla Leisure Страницы: 2

Бренд: Daktronics Страницы: 132

Бренд: Byron Страницы: 2

Бренд: Rosewill Страницы: 5

Бренд: Ikan Страницы: 16

Бренд: NanoCam Plus Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды