16
Use this function to record the DTV programme
you are watching on the main screen and save
it for future viewing. The recording from timer
programme or direct recording may have a
little bit of delay when it starts to record the
broadcast programme.
Please make sure the USB device is inserted. If
not, a warning message will pop up.
1.
Press the
button to record the
programme that you are currently watching.
(fig.
1
)
2.
Press the
Stop button to stop recording.
Basic Features
Using the Remote Control
You can shift playback to any point of the
virtually recorded programme. Press the
T.SHIFT
button to display the PVR Time
Shift progress bar again.
T.SHIFT
During playback, press the
T.SHIFT
button to display
a still screen.
or
When playing,
Press the
button repeatedly to speed up
x 2 / x 4
/ x 8 / x 16.
Press the
button repeatedly to speed up
x 2 / x 4
/ x 8 / x 16.
During fast forward / fast backward state, press the
button to return to normal playback.
To display the recording progress bar again,
press the
button.
or
Press the
button to jump about 10% forward.
Press the
button to jump about 10% back.
During playback, press the
button to display a still
screen and then press the
button again to resume
playback.
During fast forward / fast backward state, press the
button to return to normal playback.
ENTER
During playback, press the
ENTER
button to display a still
screen and then press the
button again to resume
playback.
If you want to exit the PVR Time Shift progress bar and
return to the current live broadcast, press the
button and
then press the
button to confirm.
Time Shift Function (DTV mode)
Recording DTV Programme onto a USB Storage Device
Recording will stop automatically when the
disk is full.
fig.
1
If a hard disk is used, make sure its mains
adapter is connected to the mains supply.
If a USB hub is used, make sure its mains
adapter is connected to the mains supply as the
total current consumption may exceed 500mA.
The maximum supported storage space of the
hard disk is 1 TB.
The file system only supports FAT32 format.
If you want to store the video streaming of a DTV
programme, the transfer rate of the USB storage
device must not be less than 5MB/s, otherwise
the picture and sound of the programme will be
affected and a warning statement will be shown
on the screen. If this happens, please upgrade
your USB storage device.
The TV screen will be blank temporarily as it will
take time to start up and stabilise the connected
hard disk. This is normal and the starting time
may vary depending on the brand and the
memory size of the connected hard disk.
Disconnect the USB storage device if it is not in
use.
Содержание LE70EC04AUD
Страница 3: ......
Страница 4: ...Safety Information Please read these instructions fully before installing or operating ...
Страница 5: ......