manualshive.com logo in svg

Hitachi IC25N010ATCS04, Технические характеристики

Жесткий диск Hitachi IC25N010ATCS04 предлагает высокие технические характеристики и надежность. Вы можете скачать бесплатное руководство пользователя с подробными спецификациями на нашем сайте. Не упустите шанс ознакомиться с инструкцией перед использованием продукта. manualshive.com - ваш источник бесплатных руководств.

Поделиться
Скачать
background image

11.7 Advanced Power Management (ABLE-3) feature

This feature provides power saving without performance degradation. The Adaptive Battery Life
Extender 3 (ABLE-3) technology intelligently manages transition among power modes within the device by
monitoring access patterns of the host.

This technology has three idle modes; Performance Idle mode, Active Idle mode, and Low Power Idle
mode.

This feature allows the host to select an advanced power management level. The advanced power
management level is a scale from the lowest power consumption setting of 01h to the maximum perfor-
mance level of FEh. Device performance may increase with increasing advanced power management
levels. Device power consumption may increase with increasing advanced power management levels.
The advanced power management levels contain discrete bands, described in the section of Set Feature
command in detail.

This feature set uses the following functions:

!

A SET FEATURES subcommand to enable Advanced Power Management

!

A SET FEATURES subcommand to disable Advanced Power Management

The Advanced Power Management feature is independent of the Standby timer setting. If both Advanced
Power Management level and the Standby timer are set, the device will go to the Standby state when the
timer times out or the device's Advanced Power Management algorithm indicates that it is time to enter the
Standby state.

The IDENTIFY DEVICE response word 83, bit 3 indicates that Advanced Power Management feature is
supported if set. Word 86, bit 3 indicates that Advanced Power Management is enabled if set. Word 91,
bits 7-0 contain the current Advanced Power Management level if Advanced Power Management is
enabled.

11.7.1 Performance Idle Mode

This mode is usually entered immediately after Active mode command processing is complete, instead of
conventional idle mode. In Performance Idle mode, all electronic components remain powered and full
frequency servo remains operational. This provides instantaneous response to the next command. The
duration of this mode is intelligently managed as described below.

11.7.2 Active Idle Mode

In this mode, power consumption is 45–55% less than that of Performance Idle mode. Additional electro-
nics are powered off and the head is parked near the mid-diameter of the disk without servoing. Recovery
time to Active mode is about 20 ms.

11.7.3 Low Power Idle Mode

Power consumption is 60–65% less than that of Performance Idle mode. The heads are unloaded on the
ramp but the spindle is still rotated at the full speed. Recovery time to Active mode is about 300 ms.

11.7.4 Transition Time

The transition time is dynamically managed by the user's recent access pattern, instead of fixed times.
The ABLE-3 algorithm monitors the interval between commands instead of the command frequency of
ABLE-2. The algorithm supposes that the next command will come with the same command interval

Hitachi Travelstar 60GH & 40GN hard disk drive specifications

82

Содержание IC25N010ATCS04


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IC25N010ATCS04

D-Link ShareCenter Pro DNS-1200-05 Quick Installation Manual preview
ShareCenter Pro DNS-1200-05
Бренд: D-Link Страницы: 68
D-Link DNS-312H Quick Instruction Manual preview
DNS-312H
Бренд: D-Link Страницы: 10
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Бренд: Qlogic Страницы: 20
Qsan XCubeDAS XD5324D User Manual preview
XCubeDAS XD5324D
Бренд: Qsan Страницы: 49
Medion P83771 Instruction Manual preview
P83771
Бренд: Medion Страницы: 37
Dancover PR97060 Manual preview
PR97060
Бренд: Dancover Страницы: 66
Glyph DV-Project Specification preview
DV-Project
Бренд: Glyph Страницы: 2
Hitachi F1500 Hardware Manual preview
F1500
Бренд: Hitachi Страницы: 208
Hitachi AMS 2500 Getting Started Manual preview
AMS 2500
Бренд: Hitachi Страницы: 36
Hitachi HUS151414VL3600 Quick Installation Manual preview
HUS151414VL3600
Бренд: Hitachi Страницы: 5
Hitachi HUS157336EL3600 Quick Installation Manual preview
HUS157336EL3600
Бренд: Hitachi Страницы: 4
Hitachi Hyper Scale-Out Maintaining And Troubleshooting preview
Hyper Scale-Out
Бренд: Hitachi Страницы: 42
Hitachi Microdrive 3K8 Quick Installation Manual preview
Microdrive 3K8
Бренд: Hitachi Страницы: 4
Hitachi HTS548020M9AT00 Quick Installation Manual preview
HTS548020M9AT00
Бренд: Hitachi Страницы: 2
Hitachi IC25N020ATMR04 Quick Installation Manual preview
IC25N020ATMR04
Бренд: Hitachi Страницы: 2
Hitachi HUSSL4040BSS600 Quick Installation Manual preview
HUSSL4040BSS600
Бренд: Hitachi Страницы: 2
Hitachi LifeStudio Desk Quick Start Manual preview
LifeStudio Desk
Бренд: Hitachi Страницы: 2
Hitachi HUS156060VLS600 Quick Installation Manual preview
HUS156060VLS600
Бренд: Hitachi Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды