Hitachi IC25N010ATCS04, Технические характеристики

Страница: 176 / 217

13.30 Set Multiple (C6h)
see below Status 1 1 0 0 0 1 1 0 Command
- - - - - - - - Device/Head 1 -1 D - - - - Device/Head
- - - - - - - - Cylinder High - - - - - - - - Cylinder High
- - - - - - - - Cylinder Low - - - - - - - - Cylinder Low
- - - - - - - - Sector Number - - - - - - - - Sector Number
- - - - - - - - Sector Count V V V V V V V V Sector Count
see below Error - - - - - - - - Feature
- - - - - - - - Data - - - - - - - - Data
7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0 Register
Command Block Input Registers Command Block Output Registers
V - 0 - - 0 V 0 0 0 V 0 0 0 0 0
ERR IDX COR DRQ DSC DF RDY BSY AMN T0N ABT 0 IDN 0 UNC CRC
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
Status Register Error Register
Figure 119. Set Multiple command (C6h)
The Set Multiple command enables the device to perform Read and Write Multiple commands and
establishes the block size for these commands. The block size is the number of sectors to be transferred
for each interrupt.
The default block size after power up or hard reset is 0. The Read Multiple and Write Multiple commands
are disabled.
If an invalid block size is specified, an Abort error will be returned to the host. The Read Multiple and Write
Multiple commands will be disabled.
Output parameters to the device
Sector Count. This indicates the block size to be used for the Read Multiple and the Write
Multiple commands. Valid block sizes can be selected from 0, 2, 4, 8 or 16. If 0 is
specified, then the Read Multiple and the Write Multiple commands are disabled.
Hitachi Travelstar 60GH & 40GN hard disk drive specifications
163