manualshive.com logo in svg

Hitachi IC25N010ATCS04, Технические характеристики

Жесткий диск Hitachi IC25N010ATCS04 предлагает высокие технические характеристики и надежность. Вы можете скачать бесплатное руководство пользователя с подробными спецификациями на нашем сайте. Не упустите шанс ознакомиться с инструкцией перед использованием продукта. manualshive.com - ваш источник бесплатных руководств.

Поделиться
Скачать
background image

13.32.1.8 S.M.A.R.T. Enable Operations (subcommand D8h)

This subcommand enables access to all S.M.A.R.T. capabilities within the device. Prior to receipt of a
S.M.A.R.T. Enable Operations subcommand, Attribute Values are neither monitored nor saved by the
device. The state of S.M.A.R.T.—either enabled or disabled—will be preserved by the device across
power cycles. Once enabled, the receipt of subsequent S.M.A.R.T. Enable Operations subcommands will
not affect any of the Attribute Values. 

Upon receipt of the S.M.A.R.T. Enable Operations subcommand from the host, the device asserts BSY,
enables S.M.A.R.T. capabilities and functions, clears BSY, and asserts INTRQ.

13.32.1.9 S.M.A.R.T. Disable Operations (subcommand D9h)

This subcommand disables all S.M.A.R.T. capabilities within the device including the device's attribute
auto save feature. After receipt of this subcommand the device disables all S.M.A.R.T. operations. Non
self-preserved Attribute Values will no longer be monitored. The state of S.M.A.R.T.—either enabled or
disabled—is preserved by the device across power cycles. Note that this subcommand does not preclude
the device's power mode attribute auto saving.

Upon receipt of the S.M.A.R.T. Disable Operations subcommand from the host, the device asserts BSY,
disables S.M.A.R.T. capabilities and functions, clears BSY, and asserts INTRQ.

After receipt of the device of the S.M.A.R.T. Disable Operations subcommand from the host, all other
S.M.A.R.T. subcommands—with the exception of S.M.A.R.T. Enable Operations—are disabled, and
invalid and will be aborted by the device—including the S.M.A.R.T. Disable Operations subcommand—
returning the error code as specified in Figure 133 on page 181.

Any Attribute Values accumulated and saved to volatile memory prior to receipt of the S.M.A.R.T. Disable
Operations command will be preserved in the device's Attribute Data Sectors. If the device is re-enabled,
these Attribute Values will be updated, as needed, upon receipt of a S.M.A.R.T. Read Attribute Values or
a S.M.A.R.T. Save Attribute Values command.

13.32.1.10 S.M.A.R.T. Return Status (subcommand DAh)

This subcommand is used to communicate the reliability status of the device to the host's request. Upon
receipt of the S.M.A.R.T. Return Status subcommand the device asserts BSY, saves any updated
Attribute Values to the reserved sector, and compares the updated Attribute Values to the Attribute
Thresholds.

If the device does not detect a Threshold Exceeded Condition, or detects a Threshold Exceeded Condition
but involving attributes are advisory, the device loads 4Fh into the Cylinder Low register, C2h into the
Cylinder High register, clears BSY, and asserts INTRQ.

If the device detects a Threshold Exceeded Condition for prefailure attributes, the device loads F4h into
the Cylinder Low register, 2Ch into the Cylinder High register, clears BSY, and asserts INTRQ. Advisory
attributes never result in a negative reliability condition.

13.32.1.11 S.M.A.R.T. Enable/Disable Automatic Off-line (subcommand DBh)

This subcommand enables and disables the optional feature that cause the device to perform the set of
off-line data collection activities that automatically collect attribute data in an off-line mode and then save
this data to the device's nonvolatile memory. This subcommand may either cause the device to automati-
cally initiate or resume performance of its off-line data collection activities or cause the automatic off-line
data collection feature to be disabled. This subcommand also enables and disables the off-line read scan-
ning feature that cause the device to perform the entire read scanning with defect reallocation as the part
of the off-line data collection activities.

Hitachi Travelstar 60GH & 40GN hard disk drive specifications

168

Содержание IC25N010ATCS04


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IC25N010ATCS04

SAJ B1 Series User Manual preview
B1 Series
Бренд: SAJ Страницы: 28
LaCie LaCie Ethernet Big Disk Quick Install Manual preview
LaCie Ethernet Big Disk
Бренд: LaCie Страницы: 16
LaCie 4BIG QUADRA USB 3.0 User Manual preview
4BIG QUADRA USB 3.0
Бренд: LaCie Страницы: 41
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Бренд: LaCie Страницы: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Бренд: LaCie Страницы: 14
LaCie Hard Drive Quick Install Manual preview
Hard Drive
Бренд: LaCie Страницы: 13
LaCie D2 BLU-RAY XL Manual preview
D2 BLU-RAY XL
Бренд: LaCie Страницы: 29
LaCie D2 BLU-RAY XL Brochure & Specs preview
D2 BLU-RAY XL
Бренд: LaCie Страницы: 4
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Бренд: LaCie Страницы: 5
LaCie 301382U Specifications preview
301382U
Бренд: LaCie Страницы: 6
IBM DJNA-351010 Quick Installation Manual preview
DJNA-351010
Бренд: IBM Страницы: 2
QNAP TS-464U User Manual preview
TS-464U
Бренд: QNAP Страницы: 69
QNAP TS-h1677XU-RP Quick Installation Manual preview
TS-h1677XU-RP
Бренд: QNAP Страницы: 7
Seagate Barracuda 7200.10 PATA Product Manual preview
Barracuda 7200.10 PATA
Бренд: Seagate Страницы: 54
Accu ESS R050100 User Manual preview
ESS R050100
Бренд: Accu Страницы: 44
morse 0719 Operator'S Manual preview
0719
Бренд: morse Страницы: 6
HP StorageWorks E Series Getting Started preview
StorageWorks E Series
Бренд: HP Страницы: 8
HP StorageWorks 9000s NAS Quick Reference And Rack Installation Instructions preview
StorageWorks 9000s NAS
Бренд: HP Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды