24
HX-RIO3 Series
6.4. BOOTP / DHCP
‘IP Address’ setting is available for BOOTP / DHCP.
BOOTP
: short for Bootstrap Protocol, is a UDP network protocol used by a network client to obtain its IP
address automatically. This is usually done in the bootstrap process of computers or operating systems
running on them. The BOOTP server can assign the IP address from a pool of addresses to each client.
DHCP
: set of rules used by communications devices such as a computer, router or network adapter to
allow the device to request and obtain an IP address from a server which has a list of addresses available
for assignment.
(1)
Run ‘[Hitachi] -> [IOGuidePro] -> [Protocol Messenger] -> [Modbus]’
(1)
Write the value of each.
•
Protocol :
Modbus TCP, Modbus RTU
•
ComPort :
User Port / Baudrate : 115200(default)
•
Address(Hex) :
160B (IP Setting Method Register)
•
Function(Dec) :
16, Write Multiple registers
Содержание HX-RIO3 Series
Страница 1: ...1 HX RIO3 Series Version 1 02 MODBUS Programmable I O RIO3 CP3MBT User Manual ...
Страница 2: ...2 HX RIO3 Series DOCUMENT CHANGE SUMMARY REV PAGE REMARKS DATE EDITOR 1 02 All new Jan 21 Faber ...
Страница 36: ...36 HX RIO3 Series 4 Search the file to download using a search button 5 Click a Upload Button ...
Страница 37: ...37 HX RIO3 Series 6 If it finish you can see a below message File Upload Done And click a Reset Adapter button ...
