background image

Server specifications

Physical:

Weight: 23 kg (51 lb.) with metal bezel

Height: 132 mm. (5 in.)

Depth (bezel to PSU): 725 mm. (28.6 in.)

Width: 440 mm. (17.3 in.)

Rack space required: 3U (5.25 in.)

Note: A rack unit, or U, is a unit of measure that is used to describe the

height of equipment intended to be mounted in a rack. One rack unit is

equivalent to 1.75 inches or 44.45 millimeters.

The power and cooling information is shown as follows:

Note: The power supplies and cooling fans are hot-swappable.

Table 1 Power and cooling details

Power or cooling detail

Hitachi NAS Platform

Voltage range (Ave./Max.)

100 VAC – 2.1/2.6A
110 VAC – 1.9/2.4A
200 VAC – 1.0/1.3A
208 VAC – 1.0/1.3A
230 VAC – 0.9/1.2A

Power supply rating

495W

Average thermal (BTU/hour)

710

Max. thermal (BTU/hour)

887

Max. power usage

260W

Heighth/width/depth

3U, 5.2 in. (132mm)/
17.3 in. (440mm)/28.6 in. (725mm)

Weight

Weight 51 lbs. (23kg)

Compliance

RoHS 6
China RoHS Compliant
EU RoHS Compliant
Safety
EU: EN62368-1: 2nd edition

Server specifications

Chapter 4: Hitachi NAS Platform server components

Hitachi NAS Platform Series 5000 Hardware Reference

21

Содержание HNAS 5200

































































Отзывы: