Hitachi HF-W6500 45/40, Руководство по функциям

Страница: 157 / 163

8. SIMULATING THE HARDWARE STATUS
8-10
NOTE
If the “Setting” is not selected (that is, “---” is shown) or is the same as the
“Status” when you click
Apply , the current “Status” does not change.
The following shows a list of items on the popup menu that are displayed when you
right-click each hardware item.
On the popup menu, the current status and the statuses that the current status can
transition to are displayed. Note that if the current status is the only status that can be
displayed on the menu, “None” is displayed shaded on the menu.
●
Fan
The following shows a popup menu when you right-click on this item.
No. Current status Statuses in the popup menu Note
1 Normal Normal, Error
2 Error
●
Internal Temperature
The following shows popup menu when you right-click on this item.
No. Current status Statuses in the popup menu Note
1 Normal Normal, Error
2 Error
●
Drive
The following shows a popup menu when you right-click on this item.
<Other than D Model>
No. Current status Statuses in the popup menu Note
1 Healthy Healthy, SMART Detected,
Overrun, Not Connected (*1)
2 SMART Detected Healthy, SMART Detected,
Not Connected
(*1) (*2)
3 Overrun Healthy, Overrun, Not Connected (*1) (*2)
4 Not Connected Healthy, Not Connected (*1) (*3)
(*1) In the case of models other than D Model, the equipment never starts without
drive bay1 being mounted, and consequently, “Not connected” is not displayed
for drive bay1 on the popup menu.
(*2) Transition from “SMART Detected” or “Overrun” to “Healthy” means that the
target drive is replaced with a new one and that the new drive is connected.
(*3) We suppose transition from “Not Connected” means a new drive is connected.
Consequently, transition to “SMART Detected” or “Overrun” is not allowed.