5 - 4
(3) L Block
1) Remove the six screws [A].
2) Open the jack cover (e) and then remove the
screw [G].
3) Open the L block in the direction of the arrow
from the rear side.
Take care at this time that the LMF2-L/
LMF3-L circuit board and two speaker
cables between the L and R blocks do not get
disconnected.
4) Unplug the speaker cable connector (c).
5) Remove the LMF2-L/LMF3-L circuit board (d)
in the direction of the arrow.
Caution during disassembly and reassembly:
Securely plug the connector (speaker cable
connector) into the LMF2-L/LMF3-L circuit
board.
Fig. 5-3-3
Detailed view of screw positions
Disassembly and Reassembly > Disassembly
2) [G]
1) [A]
1) [A]
1) [A]
5)
4)
(b)
(c)
(a)
(d)
(d)
(e)
3)
2) [G]
1) [A]
1) [A]
1) [A]
[G] M1.7×4
(Silver)
[A] M1.7×4
(Silver)
(a) L block
(b) R block
(c) Connector of speaker cables
(d) LMF2-L/LMF3-L circuit board
(e) Jack cover
