6 - 23
6-4 Adjustment Procedure
Start the adjustment software referring to “6-2-5 Starting and Terminating Adjustment Program”.
For the subsequent operation, operate the PC mouse while watching the PC monitor screen.
Information:
1) Display ×××× on subsequent PC screen shows the model name.
2) The numbers on PC screens show the operational procedure.
Adjustment > Adjustment Procedure
6-4-1 Initial Data Write
Note:
1) Write the initial data only after the MAN
circuit board has been replaced when the
backup of EEPROM data could not be
performed using the MAN circuit board
before replacement.
Refer to “5-4 EEPROM data backup and
write” for backup of EEPROM data.
2) Writing the initial data will initialize all the
adjustment data in EEPROM. After writing,
be sure to perform all the appropriate
adjustments.
Procedure:
1) Choose DATA INITIALIZE.
2) Click the EXECUTE button.
3) Choose Initial Data Write.
4) Click the EXECUTE button to start writing
of initial data.
The progress status can be con
fi
rmed using
the PROGRESS STATUS dialog.
5) Click the OK button to restore the DATA
INITIALIZE MENU screen.
6) Click the RETURN button on DATA
INITIALIZE MENU screen to restore the
ADJUST MENU screen, and then be sure to
perform all the adjustment items.
ADJUST MENU screen
DATA INITIALIZE MENU screen
PROGRESS STATUS dialog
INITIALIZATION FINISHED dialog
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
××××
DATA INITIALIZE
EXECUTE
RETURN
CONNECTION
ADJUST MENU
SAMPLING PULSE
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
AUTO FUCUS
SPOT NOISE
LCD
VIDEO LEVEL
BURST LEVEL
2
1
Data Initialize
Initial Data Write
EXECUTE
RETURN
CONNECTION
FILE MENU
Original Data Backup
Backup Data Write
4
3
6
DATA INITIALIZE
PLEASE WAIT A MOMENT
FINISHED
FINISHED WRITING DATA
OK
5
