1. Inspecting the body of the dust extractor system
Regularly inspect the places where the various parts
of the dust extractor system
fi
t together to make sure
there is no rattling or loose parts.
If the dust extractor system is used while parts of it
are loose, there is a risk of injury or other accidents.
If there is anything abnormal with the dust extractor
system, consult the Hitachi Authorized Service
Center.
2. Cleaning on the outside
When the power tool is stained, wipe with a soft dry
cloth or a cloth moistened with soapy water. Do not
use chloric solvents, gasoline or paint thinner, for they
melt plastics.
3. Handling the motor
Be careful not to allow oil, water, or other
fl
uids to get
inside the internal motor.
(
Fig. 1 on page 6
)
4. Cleaning the terminal (Fig. 21)
The terminal of the dust extractor system is an
important component that supplies electrical current
to the motor.
After drilling concrete, if there is concrete dust
adhered to the terminal, use a soft brush or a similar
tool to clean o
ff
the adhered concrete dust before
using the dust extractor system again.
Additionally, clean the area around the terminal
insertion port of the tool body.
(
Fig. 21
)
Terminal insertion port of tool body
MAINTENANCE AND INSPECTION
WARNING
When performing inspections or maintenance, be sure to turn o
ff
the tool’s switch and remove the dust
extractor system from the tool body.
Terminal of dust
extractor system
Fig. 21
CAUTION
To prevent accident, make sure to turn the switch
o
ff
, then disconnect the battery and the drilling
tool.
NOTE
Using the dust extractor system while there is concrete
dust still adhered to it may result in a faulty terminal
connection and may cause a malfunction.
5. Storage
○
Store the power tool in a place in which the
temperature is less than 50°C and out of reach of
children.
○
When storing the dust extractor system, press the
nozzle adjustment button to put the nozzle in the fully
extended position.
Keeping the nozzle contracted inside the dust extractor
system may result in its pressing force becoming
weaker.
(
Fig. 22
)
13
English
000Book̲Dust extractor system̲NA.indb 13
000Book̲Dust extractor system̲NA.indb 13
2017/12/05 13:42:59
2017/12/05 13:42:59
