Hitachi D36WF840N, Инструкция по эксплуатации

Страница: 30 / 74

Once the method of entry has been decided upon and the new frequency or RF
channel entered, this can then be stored in the TV's memory by pressing the
confirmation button.
To return to normal TV operation press the TV button on your handset.
entry method 2
If the RIGHT cursor key
is pressed,
autosearch becomes
an option - you can
search either up or
down.
9
10
entry method 3
If the RIGHT cursor key is pressed
again, you can enter a two digit RF channel
number (CH) using the buttons 0-9.
entry method 4
If the RIGHT cursor key is pressed
again, you can enter a two digit S-Band
number using the buttons 0-9.
entry method 5
If the RIGHT cursor key is
pressed again, you can manually input a
five digit frequency using the numbered
handset buttons 0-9.
If your TV is switched on but no broadcast signal is received, your TV will automatically
switch to standby mode after a period of 10 minutes.
entry method 1
The first option will
be to fine tune the
chosen frequency
either up or down.
30
Manual T
une - Analogue
OPERA
TION