MODEL D 10VC
−
#
1
−
1. ASSEMBLY/DISASSEMBLY GUIDE:
The circled numbers in the descriptions below correspond to the
part numbers in the Parts Price List for Type D10VC.
1-1 Disassembly:
A. Disassembly of Parts Within the Handle:
(1) Remove the Handle Cover:
Loosen the M4 x 20 + -Hd. Tapping Screws
21
, and remove
the Handle Cover
22
.
(2) Remove the Carbon Brush:
With a small minus-head screwdriver, lift up on the Brush
Holder
24
, and pull it out slightly. Next, pull out the
terminal portion which connects the Carbon Brush
25
and
the lead wire from the Reversing Switch Ass’y
27
. When
pulling the terminal, it is best to push the Carbon Brush fully
into the Brush Holder (see Fig. 2).
Fig. 2
(3) Remove the Cord:
Loosen the M4 x 16 + -Hd. Tapping Screws
28
which retain
the Cord Clip
29
, and remove the Cord
30
together with
the Cord Armor
31
.
B. Disassembly of the Armature Ass’y and Stator Ass’y:
(1) Loosen the M4 x 50 + -Hd. Tapping Screws
8
and the
M4 x 35 + -Hd. Tapping Screws
7
which retain the Gear
Cover
9
, and remove the Gear Cover from the Housing
18
. Then, remove the Inner Cover Ass’y
11
and the
connected Armature Ass’y
14
from the Housing.
Terminal
Intermal Wire
Brush Holder
24
Carbon Brush
25
Carbon Brush
Stop Piece
Convex Portion
Terminal
Push
