Hitachi CP-X608 Скачать руководство пользователя страница 19

Страница: 19 / 83

2. Equipment connection and network setting

2.4 Manual network connection setting – For wireless LAN (Continued)

8) Set each item as follows.

Network name (SSID): wireless

Data encryption: Invalid (Default setting is invalid.)

* This explanation meets the projector default setting. If access point is used or

data encryption is used, if needs to change settings properly. Refer to PC or

wireless LAN device user guide for detailed information.

* If using the existing network via access point, contact your network administrator.

2.5

Configuring and controlling the projector via a web browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

• Internet Explorer 5.5 or higher are required.

• If JavaScript is disabled in your web browser configuration, you must enable

JavaScript in order to use the projector web pages properly. See the Help files

for your web browser for details on how to enable JavaScript.

• If no operations are performed via a web browser for approx. 50 seconds the

system will automatically log off. Please Re-log on to continue operations via a

web browser.

• After you logon, a small, blank window will appear behind the main operation

window. Please do not close this small, blank window. If this window is closed,

the system will automatically log off after certain period of time even if an

operation is being performed.

The small, blank window will close when the main operation window is closed.

• The small, blank window may be considered a pop-up and be blocked if you

are using Windows XP Service Pack 2, or using other security software.

If Service Pack 2 blocks the window the following message will appear:

"Pop-up blocked. To see this pop-up or additional options click here..."

Please select "Temporarily Allow Pop-ups" or "Always Allow Pop-ups From This

Site..." to allow the window to open.

• It is recommended that all web browser updates be installed. It is especially

recommended that all users running Internet Explorer on a Microsoft Windows

version prior to Windows XP Service Pack 2 install security update Q832894

(MS04-004) or the web browser interface may not be displayed correctly.

And when using an older version of Internet Explorer, during operations the

browser will log out after 50 seconds.

NOTE

Содержание CP-X608




















































































Результаты поиска

Содержание CP-X608

Отзывы:

Похожие инструкции для CP-X608

Бренды по названию

Популярные бренды

Hitachi CP-X608, Руководство пользователя

Результаты поиска

Содержание CP-X608

Отзывы:

Похожие инструкции для CP-X608

Бренды по названию

Популярные бренды