Hitachi CP-A52 Series Скачать руководство пользователя

Страница: 64 / 71

Troubleshooting

If an abnormal operation should occur, stop using the projector immediately.

Otherwise if a problem occurs with the projector, the following checks and

measures are recommended before requesting repair.

If this does not resolve the problem, please contact your dealer or service

company. They will tell you what warranty condition is applied.

►Never use the projector if abnormal operations such as

smoke, strange odor, excessive sound, damaged casing or elements or cables,

penetration of liquids or foreign matter, etc. should occur. In such cases,

immediately turn off the power switch and then disconnect the power plug from

the power outlet. After making sure that the smoke or odor has stopped, contact

to your dealer or service company.

WARNING

Related messages

When some message appears, check and cope with it according to the following

table. Although these messages will be automatically disappeared around several

minutes, it will be reappeared every time the power is turned on.

Message

Description

There is no input signal.

Please confirm the signal input connection, and the status

of the signal source.

The horizontal or vertical frequency of the input signal

is not within the specified range.

Please confirm the specs for your projector or the signal

source specs.

An improper signal is input.

Please confirm the specs for your projector or the signal

source specs.

The internal temperature is rising.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After having confirmed the

following items, please turn the power ON again.

• Is there blockage of the air passage aperture?

• Is the air-filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

A note of precaution when cleaning the air-filter.

Please immediately turn the power off, and clean or change

the air-filter referring to the “Maintaining the air-filter” section

of this manual. After you have cleaned or changed the air-

filter, please be sure to reset the filter time (



45, 60

)

Содержание CP-A52 Series








































































Результаты поиска

Содержание CP-A52 Series

Отзывы:

Похожие инструкции для CP-A52 Series

Бренды по названию

Популярные бренды

Hitachi CP-A52 Series, Руководство пользователя – Инструкция по эксплуатации

Результаты поиска

Содержание CP-A52 Series

Отзывы:

Похожие инструкции для CP-A52 Series

Бренды по названию

Популярные бренды