Hitachi CP-A52 Series Скачать руководство пользователя

Страница: 42 / 71

SCREEN menu

SCREEN menu (continued)

Item

Description

MESSAGE

Using the ▲/▼ buttons turns on/off the message function.

TURN ON

TURN OFF

When the TURN ON is selected, the following message function works.

“AUTO IN PROGRESS” while automatically adjusting

“NO INPUT IS DETECTED”

“SYNC IS OUT OF RANGE”

“INVALID SCAN FREQ.”

“Searching…” while searching for the input

“Detecting…” while an input signal is detected

The indication of the input signal displayed by changing

The indication of the aspect ratio displayed by changing

The indication of the PICTURE MODE displayed by changing

The indication of the MY MEMORY displayed by changing

The indication of the TEMPLATE displayed by changing

The indication of "+++ FOCUS +++" displayed by changing

The D-ZOOM dialog displayed by changing

The indication of “FREEZE” and “II” while the projector is in the FREEZE mode.

• If the projector goes into the FREEZE mode while the TURN OFF

is selected, the picture on screen is frozen without any messages,

which is not a malfunction

(



)

SOURCE NAME

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ buttons on the SCREEN menu to

select SOURCE NAME and press the ► button.

The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SOURCE

NAME menu to select the port to be named

and press the ► button. Right side of the

menu is blank until a name is specified.

The SOURCE NAME dialog will be displayed.

(3) The current name will be displayed on the

first line. Use the ▲/▼/◄/► buttons and the

ENTER

INPUT

button to select and enter characters. The

RESET

button can be used to erase 1 character at a time. Also if you move the

cursor to DELETE or ALL CLEAR on screen and push the

ENTER

INPUT

button, 1 character or all characters will be erased. The name can

be a maximum of 16 characters.

(4) To change an already inserted character, press the (▲) button to

move the cursor to the first line, and use the ◄/► buttons to move the

cursor on the character to be changed.

After pressing the

ENTER

INPUT

button, the character is selected.

Then, follow the same procedure as described at the item (3) above.

(5) To finish entering text, move the cursor to the SAVE on screen

and press the

ENTER

INPUT

button. To revert to the previous

name without saving changes, move the cursor to the CANCEL on

screen and press the

ENTER

INPUT

button.

(continued on next page)

Содержание CP-A52 Series








































































Результаты поиска

Содержание CP-A52 Series

Отзывы:

Похожие инструкции для CP-A52 Series

Бренды по названию

Популярные бренды

Hitachi CP-A52 Series, Руководство пользователя – Инструкция по эксплуатации

Результаты поиска

Содержание CP-A52 Series

Отзывы:

Похожие инструкции для CP-A52 Series

Бренды по названию

Популярные бренды