Hitachi CG 14DSDL, Инструкция по эксплуатации, Страница: 18 / 164

18
English
CG18DSDL
(2LLR)
1
Battery (BSL1840) ................................2
2
Charger (UC18YRSL) ...........................1
3
Nylon head ............................................1
4
Cover ....................................................1
5
Hex. bar wrench 4 mm ..........................1
6
17×19 Combi box wrench .....................1
7
Protective glass ....................................1
8
Battery cover ........................................1
CG18DSDL
(NN)
1
Nylon head ............................................1
2
Cover ....................................................1
3
Hex. bar wrench 4 mm ..........................1
4
17×19 Combi box wrench .....................1
5
Protective glass ....................................1
Standard accessories are subject to change without notice.
[Included items]: Loop handle
The following items are supplied with the product (used for
assembly of each part).
1
Cover holder ................................................................. 1
2
M6 × 25 hex. socket button bolt ................................... 2
3
M6 spring washer ......................................................... 2
4
Knife ............................................................................. 1
5
D5 tapping screw ......................................................... 1
6
Loop handle ................................................................. 1
7
Handle fi xture ............................................................... 1
8
M6 × 43 bolt .................................................................. 2
9
M6 nut ........................................................................... 2
0
Flange ass'y ................................................................. 1
[Included items]: Bicycle-style handle bar
The following items are supplied with the product (used for
assembly of each part).
1
Cover holder ................................................................. 1
2
M6 × 25 hex. socket button bolt ................................... 2
3
M6 spring washer ......................................................... 2
4
Knife ............................................................................. 1
5
D5 tapping screw ......................................................... 1
6
Handle left .................................................................... 1
7
Flange ass'y ................................................................. 1
OPTIONAL ACCESSORIES (sold separately)
1. Battery
(BSL1430) (BSL1830)
(BSL1440) (BSL1840)
2. Battery cover
Optional accessories are subject to change without notice.
APPLICATIONS
Trimming, scaling and mowing of weed.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see Fig. 2 ).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see Fig.
2 ).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 3 and 4 (UC18YGSL), Fig. 5 and 6 (UC18YRSL).
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1 )
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1 , according to the condition of the charger or the
rechargeable battery.
000Book_CG14DSDL_EE.indb 18 000Book_CG14DSDL_EE.indb 18 2013-1-24 18:25:56 2013-1-24 18:25:56