Hitachi CC 14, Инструкция по эксплуатации и правила безопасности

Страница: 16 / 52

English
16
6. Lubrication.
Lubricate the following sliding surfaces once a month to keep the power tool in good
operating condition for a long time (see Fig.1 and 2). Use of machine oil is recommended.
Oil supply points:
*Rotary portion of shaft.
*Rotary portion of vise.
*Rotary portion of vise-jaw.
*Quick vise.
7. Cleaning.
Periodically remove chips and other waste material from the surface of the power tool
with a damp, soapy cloth. To avoid a malfunction on the motor, protect it from contact
with oil or water.
SERVICE AND REPAIRS
All quality power tools will eventually require servicing or replacement of parts because of
wear from normal use. To assure that only authorized replacement parts will be used, and
that the double insulation system will be protected, all service (other than routine maintenance)
must be performed by an AUTHORIZED HITACHI POWER TOOL REPAIR CENTER, ONLY.
NOTE: Specifications are subject to change without any obligation on the part of HITACHI.