Hitachi C43WP910TN, Руководство пользователя

Страница: 43 / 54

signal source entry
other equipment connection
43
Press and hold the MENU button for 5
seconds. The INSTALL option in the
MAIN MENU appears.
Press the cursor down button to select
INSTALL.
Once highlighted, accept selection.
Press the cursor down button to select
MANUAL SETUP.
Once highlighted, accept selection.
Use the cursor keys to move the
selection bar over the AV required
to be adjusted.
Select your method of signal source
entry using the up/down cursor buttons.
Once highlighted, accept the selection to
change your TV’s Audio Visual setting and
you will see the selection bar turn red - it is
ready to be changed.
1
2
3
4
5
6
7
8
...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It
would also be easier, and more organised, if the external equipment connected also had its own
program number. Signal Source entry allows us to tell the allocated program what equipment is
connected to which socket. This would make the switching between normal operation and the
connected equipment much smoother.
For example, if you want to connect a satellite to your TV -
1. connect to socket AV1 via a scart lead.
2. give your satellite an empty programl number of its own.
3. if desired change this program name.
4. give this program number the correct AV signal source (in this case AV1).
5. If you require to connect a DVD or Laserdisc player, then connect this to AV2 or AV3 (if not RGB
output on player) or AV1 if there is RGB output on player.
option 1
AV1 is the signal source used when connecting
external equipment such as a DVD player with RGB
output through a scart lead to the AV1 socket at the rear
of your TV.