72
Maintenance
(continued)
Lint filter
(continued)
Close the lint filter lid.
If the lint filter lid detaches during cleaning
Tabs
Shaft
Make sure the two tabs are firmly secured.
If the lint filter lid detaches, align the filter lid with the shaft on the
main body of the filter, and push it in vertically.
Orient the lint filter so that the “UP” mark on the filter is
facing up.
Filter part
“UP” mark
Rubber seal
Knob
Make sure that the rubber seal on the lint filter is still
attached.
Make sure that there is no lint or debris on the lint filter
port and the rubber seal.
Reinsert the lint filter.
Insert the lint filter fully into the port.
Turn the knob clockwise until it clicks into place.
If the knob is not turned until it clicks into place, “C16” will
appear and operation will not be possible.
(P. 80)
Insert fully
Knob
Turn clockwise until it
clicks into place
Close the lint filter cover.
Do not remove the rubber seal.
Removing the rubber seal will result in water leakage.
When reinserting the lint filter, make sure that there is no lint on the rubber seal.
Reinserting it with lint attached may result in water leakage.
If the lint filter or rubber seal is damaged, replace it immediately.
(P. 98)
Failure to do so may result in water leakage or malfunction of the machine.
If the lint filter is not securely attached, [LINT FILTER] and “C16” will appear and operation will be disabled to
prevent water leakage.
(P. 80)
Содержание BD-W3300
Страница 146: ...146 準備 打開水龍頭 將衣物放入洗衣機 關上機門 然後按 以開啟電源 按 選擇 STATIC DRY 靜態烘乾 程序 按 STATIC DRY 靜態烘乾 程序 DRY 乾衣 如何啟動 ...
Страница 198: ...198 備忘 ...
Страница 199: ...199 備忘 中文 ...
Страница 200: ...Hitachi Appliances Inc Hitachi Atago Bldg 15 12 Nishi Shimbashi 2 chome Minato ku Tokyo 105 8410 Japan 3 N0231 4A G2 C ...