![Hitachi BD-W3300 Скачать руководство пользователя страница 85](http://html.mh-extra.com/html/hitachi/bd-w3300/bd-w3300_operating-instructions-and-owners-manual_147356085.webp)
85
T
rouble
s
hoot
ing
Symptom
Possible cause
Solution
Doo
r
The door does not
open.
Is the
HIGH
indicator blinking?
When the inside of the drum is hot due to
drying operations and warm-air spinning,
a cooling operation is used to cool the
temperature down.
Wait until the inside of the drum cools down. You
can open the door when
HIGH
turns off.
(P. 32)
Is the CHILD LOCK set?
The CHILD LOCK will remain set and the
door will remain locked even when the power
automatically turns off after an operation
finishes.
Release the CHILD LOCK.
(P. 33)
Is there water inside the drum?
Depending on the water level during the
operation, the door lock may not release.
Run a spin operation to drain the water.
Is air blowing?
Even if you pause the operation, the door will
not open until the airflow stops.
Wait until the airflow stops.
Is “000” blinking in the remaining time
indicator?
If so, Soft Guard operation is in progress.
Press the [PAUSE] button to unlock the door. For
details on the Soft Guard setting, see
(P. 69)
.
The [Door OPEN]
button is difficult
to press, and the
door does not
open easily.
Depending on the operating environment, the
door bellows may stick to the door.
This is not a malfunction.
Press down on the [Door OPEN] button and pull
the door open while holding the area of the door
near the button (indented area).
The door does not
close.
Is there an obstruction stuck between the door
lock area?
Remove any objects.
Press the right middle area of the door, and close
it completely.
Is the door stopper extended?
Return the door stopper to its original position.
(P. 33)
Dru
m
The drum and
drain hose are wet,
even though they
have never been
used.
Moisture and condensation from function tests
performed at the factory may still remain in the
drum and drain hose.
This is not a malfunction.
The color of the
drum has changed.
Contact with water and detergent can oxidize
and discolor the drum.
If this is a concern, wipe the drum using a
stainless steel detergent.
Powe
r
The power does
not turn on.
Is the power plug connected to a power outlet?
Connect the power plug to a power outlet.
The operation
stops or the power
turns off while in
progress.
Did a power outage occur? Did a fuse blow or a
short circuit occur?
Press the [ON] button, and restart the operation.
Is there an appliance that emits noise, such as
a television or radio, near the machine?
If noise continuously enters the machine, the
power will turn off.
Disconnect the power plug and reconnect it,
and then press the [ON] button and restart the
operation. Do not place televisions and radios
near the machine.
If the temperature of the drum rotation
motor reaches a certain level, the power is
automatically turned off for safety.
This is not a malfunction.
Wait about 1 hour before restarting the operation.
If you start a drying operation while the dry
filter is clogged, the power may turn off
automatically.
This is not a malfunction.
Clean the dry filter.
(P. 73, 74)
En
g
lish
Содержание BD-W3300
Страница 146: ...146 準備 打開水龍頭 將衣物放入洗衣機 關上機門 然後按 以開啟電源 按 選擇 STATIC DRY 靜態烘乾 程序 按 STATIC DRY 靜態烘乾 程序 DRY 乾衣 如何啟動 ...
Страница 198: ...198 備忘 ...
Страница 199: ...199 備忘 中文 ...
Страница 200: ...Hitachi Appliances Inc Hitachi Atago Bldg 15 12 Nishi Shimbashi 2 chome Minato ku Tokyo 105 8410 Japan 3 N0231 4A G2 C ...