73
Ot
h
e
r S
e
tt
in
g
s
En
g
lish
Disabling the Tangle-Free Finish function after spin operations
This function untangles laundry (for 2 to 4 minutes) after the spin cycle of <<WASH>> operations.
(This does not operate in the [SOFT], [BLANKET], [DELICATE], and [TUB CLEAN] programs, and
<<WASH DRY>> and <<DRY>> operations.) The remaining time and [TANGLE FREE] indicators
blink during Tangle-Free Finish operations.
To change the default setting
Press <ON> to turn on the power.
When the setting is changed, it is notified by the following
indicator and beep sounds.
On (default setting)
(The indicator disappears
in 3 seconds.)
Off
(No display)
Long beep
sound
Short beep
sound
Hold <<WASH>> for at least 3
seconds.
Press <OFF> to turn off the power.
z
This setting will be saved.
To change the setting, perform the same operation.
z
The Tangle-Free Finish function may not operate for large wash loads (6 k
g
or more).
z
The Tangle-Free Finish function will not operate for operations that do not include the wash cycle.
Maintaining softness after drying operations (Fluffy Clothes)
This function continues drum rotation until you remove the laundry to maintain softness after
drying operations.
The door is locked while the drum is rotating in the Fluffy Clothes operation, so press the
<PAUSE> button before opening the door. You can open the door when the drum rotation is
paused. (This function does not operate in the [BLANKET], [FUZZY (15 MIN)], [DEODORANT],
and [POWER SAVE STATIC DRY] programs.)
Fluffy Clothes operation
The function operates for about 2 hours, rotating the drum for 12 seconds every
5 minutes.
The Fluffy Clothes operation finishes when you press the <PAUSE> button to
release the door lock.
Alternates between
pause and drum rotation
About 5 min
About 12 sec
About 2 hrs
The [FLUFFY CLOTHES] and
indicators are displayed during the
Fluffy Clothes operation.
Operation finish sound
(melody or buzzer)
Fluffy Clothes operation
Pause
Drum rotation
To change the default setting
Press <ON> to turn on the power.
When the setting is changed, it is notified by the
following indicators and beep sounds.
On
Off
(default setting)
Short beep sound
Long beep sound
Hold <<DRY>> for at least 3
seconds.
Press <OFF> to turn off the power.
z
This setting will be saved.
To change the setting, perform the same operation.