manualshive.com logo in svg

Hitachi AMS 2100, Руководство по оборудованию

Поделиться
Скачать
Hitachi AMS 2100 Скачать руководство пользователя страница 220

7–38

Configuration

Hitachi AMS 2100/2300 Storage System Hardware Guide

Hitachi AMS 2000 Series base and expansion units are preconfigured at the 

factory with a single RAID group. You can use this predefined RAID group, 

delete it, or create your own. The following procedures provide basic 

instructions for working with RAID groups. For detailed information, please 

see the Navigator 2 online help or the manuals listed in the 

Accessing 

product documentation

 section of the Preface.

Displaying RAID group properties

To display the properties of a RAID group:
1. Select an array to manage.

a. If you are not working in the array you want to manager, click 

Resources > Arrays to display the Array List window. In this 

window, click the name of the array you want to manage.

b. If you are already working with the array you want to manage and 

the Array Properties window is displayed.

2. In the array tree, expand the Groups menu.
3. Select RAID Groups. The RAID Groups window is displayed. It shows 

the properties of the RAID group and lists all the LUNs that are assigned 

to that RAID group.
•  RAID level and parity group (example: RAID6 (2D+2P))
•  The total capacity of the drives in each RAID group
•  The total free space in each RAID group
•  The type of drive(s) assigned to this RAID group.

To display detailed data for a single RAID group:
1. In the RAID Groups window, click the name of the RAID group you are 

interested in. The properties window for the selected RAID group is 

displayed. The window should look similar to the following illustration.

The Summary section of the RAID Group Window provides the information 

shown in 

Table 7-13

.

Содержание AMS 2100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды