Hitachi AMS 2000 Series, Справочное руководство

Страница: 103 / 262

Performing CCI Operations
1–85
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Command tools
Inqraid command tool
The inqraid command tool confirms the drive connection between the array
and the host system. The inqraid command displays the relation between
special files on the HP-UX system and actual physical drive of the array.
Table 1-34 lists and describes the inqraid command and parameters.
Figure 1-64 to Figure 1-79 show examples of using inqraid and system
commands to display the connection between the STDIN special file and the
actual physical drive of array.
•
Table 1-34: Inqraid Command Parameters
Parameter Value
Command
Name inqraid
Format /HORCM/usr/bin/inqraid [-h | quit | -inqdump | -fx[l][g][w] | -find[c] |
<special file> | –CLI | -CLIWP | -CLIWN | sort | -CM ] 
\HORCM\etc\inqraid [-h | quit | -inqdump | -fx[l][g][w] | -find[c] | <special
file> | –CLI | -CLIWP | -CLIWN | sort | -CM | -gvinf | -svinf ]
Options -h: This option displays help and usage.
quit: This option terminates from waiting STDIN and exits this command.
-inqdump: This option displays information for standard inquiry with Dump
Image of hexadecimal.
-fx: This option displays the LDEV number with hexadecimal.
-find [c]: This option searches a group on the configuration definition file (
local instance) from <special file> of STDIN by using pairdisplay command,
and uses the following options of the pairdisplay command to display its state.

The –find option executes the following command (see Figure 1-72 ). 
pairdisplay -d <Seq#><LDEV> 0 1 2 -l [-fx] [-CLI] 2>/dev/null 
The –find[c] option executes the following command and then displays the
result edited to CLI format (see
Figure 1-72 ). 
pairdisplay -d <Seq#><LDEV><MU#> -fd -CLI 2>/dev/null
<special file>: This option is used to specify the special file name as
argument of command.
If no argument, this command makes mode that wait for STDIN without
argument.
-CLI: Displays the CLI. This option displays the CLI using one header and
divides the column with space or with “-” (see
Figure 1-77 ).
-CLIWP and -CLIWN: For fibre channel, these options display the WWN of the
host adaptor in CLI format. PWWN or NWWN will be displayed for WWN (see
Figure 1-75, “Inqraid Command -CLIWP Option Example (Windows)”, on page
1-90
also). For iSCSI, “0000000000000000” will be always displayed for
WWN.
-sort [-CM]: Sorts and displays the order of the array product number and the
volume management number. The [-CM] option searches for command device
from the specified special file (raw device file) provided via STDIN or argument
input, and then displays only the command device in the image of the
configuration definition file (see
Figure 1-78 ).