background image

2

The lightning flash with arrowhead symbol, within an equilateral 

triangle is intended to alert the user to the presence of uninsulated 

dangerous voltage within the product's enclosure that may be of 

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating 

and maintenance (servicing) instructions in the literature 

accompanying the appliance.

 

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER 
(OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL. 

 

WARNING:

  TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 

 

  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT 

ALL TIMES.

 CAUTION:

  TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, 

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE 

EXPOSURE.

WARNING:

  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications.

 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

 

-  Reorient or relocate the receiving antenna.

 

-  Increase the separation between the equipment and receiver.

 

-  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

-  Consult the dealer or an experienced radio/TV technician for help.

CAUTION: 

  Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s 

authority to operate this equipment.

ENGLISH

ENERGY STAR

®

 

This television’s factory default settings as shipped meet ENERGY STAR requirements.

Please see the Convenience Functions section of this operating guide for more information on factory settings and the energy saving

Auto Shut Off feature.

Location of the required Marking

The rating sheet and the safety caution are on 

the rear of the unit.

Lead/Mercury Notice

This product contains lead and one or more non-replaceable mercury backlights. Do not put in trash. Recycle or dispose of 
according to applicable laws. For product recycling and disposal information, contact your local government agency or visit 
www.eiae.org (in USA) or www.epsc.ca (in Canada). 

FOR MORE INFORMATION, CALL 1-800-289-0981.

Hg

3IM0821B_En.indd   2

3IM0821B_En.indd   2

11/29/11   10:05:47 AM

11/29/11   10:05:47 AM

Содержание Alpha Series L40A105A






























Отзывы: