Hitachi Alpha Series L40A105A, Руководство пользователя

Страница: 11 / 29

11
ENGLISH
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
Before using the remote control, batteries must first be installed.
Use two “AAA” size batteries. The batteries may last approximately
one year depending on how much the remote control is used.
For best performance, it is recommended that batteries should
be replaced on a yearly basis, or when the remote operation
becomes erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries in this
device:
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the batteries
as indicated in the battery compartment. Reversed batteries
may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline and
Carbon-zinc) or old batteries with fresh ones.
If the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery
leakage.
Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
Please use caution when inserting batteries to avoid battery
damage. If the spring terminal in the remote control remains in
contact with a side of a damaged battery it can cause a short
circuit. Never use damaged batteries as they can become very
hot and are dangerous.
•
•
•
•
•
•
1.POWER Button - Press to turn the LCD TV’s power on/off.
2.AUDIO Button - Press to change the audio language.
3.Direct Channel Selection Buttons (0-9) - Allows direct
access to any channel of the LCD TV.
4.– Button - This button is the “–” button used when selecting
digital channels.
5.MENU Button - Use to display the On-Screen menu function.
6.CURSOR ▲ / ▼ / ◀ / ▶ Buttons - Use to navigate and select menu
functions of the LCD TV.
7.ENTER Button - Press to enter or select functions for the On-
Screen menu.
8.EXIT Button - Press to exit the On-Screen menu.
9.VOL (VOLUME) + / – Buttons - Press the + button to
increase, or the – button to decrease the sound level.
10.LAST CH Button - Pressing this button allow you to go back
to the previous channel selected. Press this button again to
return to the channel you were watching.
11.MUTE Button - To turn off the sound, press this button once.
The LCD TV will be silenced and “Mute” will appear on the
screen. The muting feature can be released by pressing
the MUTE button again or by pressing either of the VOL
(VOLUME) + or – buttons.
12.SLEEP Button - To set the LCD TV to turn off after a preset
amount of time, use the SLEEP button on the remote control.
13.C.C. Button - Used to display the Closed Captions menu
screen.
14.DISPLAY Button - When you press this button, the current
information will be displayed on the screen.
15.INPUT Button - Press to change the TV’s input.
16.ASPECT Button - Press to change the picture size.
17.CH (CHANNEL) / Buttons - Press to change the
channels of the LCD TV.
18.Time Shift control Buttons - See page 21.
Remote control
3
12
6
1
5
4
8
9
7
16
17
2
10
11
13
14
15
18
3IM0821B_En.indd 11 3IM0821B_En.indd 11 11/29/11 10:06:00 AM 11/29/11 10:06:00 AM