47
Dehydration doesn't fi nish
beyond the predefi ned time.
⬢⳧⥑હᆹ⿵ʯ˜ቍታȯ
It is not dried.
ቍʯȯ
The power supply switch won't
work right away when transferred
from switched-off to switched on.
ヅ〦᮫ơᅜƢⱧဘӷơⳇƢ
ᆹŊר⋱ʃሳἼ֯⬚̳ᮢȯ
The indicating LED won't light
right away when the power
supply switch is switched on.
ヅ〦ơⳇƢരŊ྆ḻᥨʃሳἼ
֯㔄ˌȯ
Four modes LED light after the power
supply switch is switched off.
ヅ〦ơᅜƢരŊ
4
ΤỄ྆ḻ
ᥨ㔄ˌȯ
It buzzes after the power supply
switch is switched off.
ヅ〦ơᅜƢരŊᱹӛơܫܫƢ
᱿⊖ㅠȯ
The lid can't be opened even when
the Pause button is pressed during
the spinning.
⌉ᖛ⳧ỄʑŊ֯͐ྈʁᇺϟྈ⸹ʬᤀ
ᘍἼ֯༌ᑨ╾ȯ
Odor of msulating varnish smells
in the beginning of use.
Ӯቅ͐ᮢᆹሷᖎػȯ
It smells at the time of spinning.
⌉ᖛᆹሷᖎػȯ
Water comes out from the water
drainage hose during fi rst time usage.
Ὦɺᓝ͐ᮢᆹŊሷᖛഺᖛᾷʑᙟӛȯ
Pulsator rotates but does not display
the washings load and water quantity
after pressing the Start button.
ྈʁ
啟
Ւྈ⸹രŊჿཝ≓ⱧՒ̟ᗞሷ
ㆴḻᘺ⠥⸇ُᖛ̤ȯ
No reaction after starting.
啟
ՒരᤀՒ̳ȯ
There are detergent residue remained
on the detergent dispenser.
ᘺ⠥⁆ᔬᮽ߱ᘺ⠥⁆ԽҘᲷȯ
•
The predefi ned time is the time for drying dehydration, and the
actual operation time need to plus the clothes dressing and
oblique correction time, which, in aggregation, will be longer
than the predefi ned time by 5~30 minutes.
⥑હᆹ⿵ᆯⳖ⠗ʯ⌉ᖛ᱿ᆹ⿵Ŋ૪も⳥Ⱨᆹ⿵ⴒ⣬Խʀㅯ⠥ُ
₉ᔌ⠥Ϙᅈ᱿ᆹ⿵ŊञᏕᕗ⥑હᆹ⿵ೖ
5
⎏
30
Ӡ⾝ȯ
•
Depending on the quantities & types of laundries, air temperature &
moisture, seasons and environment, the completion time may differ.
᮫⠥᱿ᄲ⸇
·
ỚㆩŊᖎᝐ
·
ᠪಙŊખῃُ᭔ࣀᗉહŊરໞᆹ⿵ሳ⩐ջȯ
•
Please refer to "Proposed Operation Time".
35
⦼אᤫơ⩀͐ᮢᆹ⿵⠧Ƣȯ
35
•
The power supply switch doesn't work from the cutoff of the switch
to the extinguishment of the mode LED. If the power supply is to be
switched on again, please press the switch after the LED extinguish.
ഺӡᅜヅ〦ӷỄ྆ḻᥨ᤹ᝥᣅᔋŊヅ〦ʃ⬚̳ᮢȯ
⣬ҪᓝⳇヅŊ⦼ഩ྆ḻᥨ᤹ᝥരҪྈʁヅ〦ȯ
•
The washing machine sound "Hoola, hoola" after the power supply is
switched on. About 1 second later, the LED light. (since the software
switch is used, the microcomputer need time for internal treatment.)
ⳇヅ〦രŊᘺ⠥ᑨᱹӛơܶܶƢ᱿⊖ㅠŊञ₎
1
ấ⾝ര྆ḻᥨ㔄ˌȯ
ņ᮫ᅠ͐ᮢⰖ˴〦Ŋ≟െヅ〉Ⳗ⠗ҙⵒ⚠ト⣬ᆹ⿵Ň
•
When switching off the power supply with clutch motor in spinning status,
the clutch motor returns to washing status and the mode LED light.
ẗݽヅቘ߱⌉ᖛᨊ๗ʁŊӡᅜヅ〦ᆹŊẗݽヅቘߊए⎏ᘺᝬᨊ๗Ŋ
ᆹỄ྆ḻᥨ㔄ˌȯ
•
The operation stops after the power supply is switched off during
the dehydration, and it buzzes. That's the sound generated during
switching of the modes by clutch.
⌉ᖛ⳧Ễʑӡᅜヅ〦രŊ⳥ⱧϟᔋʏᱹӛơܫܫƢ⊖ȯⳆᆯサ
ݽⳖ⠗ᑁೣӡဘᆹ᱿⊖ㅠȯ
•
After the power supply is cut off, the spinning basket stops
completely, and the lid lock will be unlocked.
ᯍᅜヅŊ⌉ᖛᐥરҚϟᔋരŊᑨ╾⽁હ૽⡕⤟ぜȯ
•
This is the odor of the insulating varnish of the motor in the
beginning of use. The odor exists only at the early stage, and
will dissappear about period of time after put into application.
ⳆᆯӮቅ͐ᮢᆹഺヅᑨʑ᱿⃑ℳថᮟᮝ᱿ᖎػȯ⥿ᯌػХએ߱ᅠӮቅŊ
͐ᮢ₎ɺᕀᆹ⿵രᖎػሳ⎊Ւᚉदȯ
•
Adverse drainage condition or excessive foams (due to
excessive detergent) may cause too much spinning load and
make the smell even more intensive.
ᖛጻ˴ณԾᘗᗩ⳧घņߌᄍҘ⳧घᘺ⠥⁆ᾀŇሳⳍໞ⌉ᖛ⪭⒎⳧
ञŊ͐വᖎػሩԽᣊȯ
•
Water from tests conducted by the manufacturer remains in the
drainage hose.
Ⳇᆯడೇϝඖ⋱ᛵ⥶ᆹԘʁ᱿ᖛȯ
•
This is because the sensor can not successful detect due to the
foreign interference. At that time, the power supply can be cut
off and the washing machine is to be restarted.
Ⳇᆯ᮫ᅠक͗ʯჟ᱿ഛㅨ≟⎐Зݽᤀᘍᔌᷨᒑᛵⳍໞ᱿ȯᔍᆹר
ӡᅜヅŊᤋരҪᓝ
啟
Ւȯ
•
This is because the washing machine is waiting for detergent or
is switching the clutch.
Ⳇᆯ᮫ᅠᘺ⠥ᑨ߱ᾀഩᄍҘᘺ⠥⁆ᔌ߱Ⳗ⠗ӡဘサݽȯ
•
When the body is excessive oblique, the detergent may remain
on the dispenser. Please check the obliquity of the body.
ᯍᑨ㋤⳧ಙРᅈᆹŊᘺ⠥⁆ר⋱ሳᔬᮽ߱ᘺ⠥⁆ԽҘᲷȯ⦼ᒑውᑨ㋤
᱿РᅈỄಙȯ
About the
drying
time
〦ᅠʯ
ᆹ⿵
About the
power
switch
〦ᅠヅ
〦
About
the air jet
processing
〦ᅠㆺʯ
Ễಙ
About the
fl avor
〦ᅠᖎػ
Others
Ң˟
About the
lid lock
〦ᅠᑨ╾⽁હ
Case
⩽
Cause
׆ߌ
