46
Case
⩽
Cause
׆ߌ
When Failure Happens (continued)
ሷᄑゃᱹᮝᆹņ↲Ň
Sprinking rinsing turns into water
storing rinse.
މᚲᗢᘺ⩐ᣅѲᖛᗢᘺȯ
When the washings is not much,
water can't be poured over the
clothes in sprinking rinising mode.
ᘺ⠥⸇ⰱଇᆹŊމᚲᗢᘺᤀᘍ૽ᖛ
ӷ⠥ʀȯ
Supply water during the course
of spinning.
⌉ᖛ⳧Ễʑͧᖛȯ
Supply water and start rinsing
during the course of spinning.
⌉ᖛ⳧Ễʑআͧᖛʏᗢᘺȯ
Spin intermittently after start
spinning.
⌉ᖛআരŊ⿵ᓷඖ߸⌉ᖛȯ
The lid can't be opened even
when the Pause button is
pressed during the spinning.
⌉ᖛ⳧ỄʑŊ֯͐ྈʁᇺϟྈ⸹ʬ
ᤀᘍἼ֯༌ᑨ╾ȯ
The power supply switch won't work
right away even when the On/Off
button is pressed during the spinning.
⌉ᖛ⳧Ễʑ֯͐ྈʁヅ〦ྈ⸹Ŋ
ヅ〦ʬʃሳἼ֯⬚̳ᮢȯ
During the period of water drainage,
the water drainage pump start to
work, and there is water drained out
from the water drainage hose.
ͧᖛ⳧ỄʑŊᖛᘧআడ̳Ŋ
ᖛᾷʑሷᖛӛ
It sounds like asthma when the
water drainage pump start to work.
ᖛᘧᖛᆹŊሷㆩ̙ڍ۶᱿⊖ㅠ
Relatively low water level
compared with the washings
load.
ᖛ̤ଃᅠᘺ⠥⸇ⰱ̥ȯ
Relatively high water level
compared with the washings load.
ᖛ̤ଃᅠᘺ⠥⸇ⰱ㋧ȯ
There are much fl oss.
ፕ⃢ⰱघᆹȯ
Washing doesn't fi nish beyond
the predefi ned time.
⬢⳧⥑હᆹ⿵ᘺ⠥˜ቍታȯ
About the
spinning
〦ᅠ⌉ᖛ
About
the water
level
〦ᅠᖛ̤
About
the lint
fi lter
〦ᅠፕ⃢
⳧ᡇݽ
About the
washing
duration
〦ᅠᘺ⠥ᆹ⿵
Ʃ
AJ-S60TXP
About
the water
drainage
pump
〦ᅠ
ᖛᘧ
•
It is because the clothes oblique cause the action of the
security switch.
᮫ᅠ⠥Ϙᅈ⎐મҚ〦Ւ̳᱿ℳᄑȯ
•
It doesn't matter that the water is hard to be poured over the
clothes since there are not much washings.
ᘺ⠥⸇ⰱଇᆹŊオᤋザ˫૽ᖛӷ⠥ʀŊ̟ᗢᘺԼ⋱ʏᤀۊ㆛ȯ
•
The security switch acts as the laundry declines.
Change automatically to the "Water-storage rinse" for the next rinsing.
᮫ᅠ⠥Ϙᅈ⎐મҚ〦Ւ̳᱿ℳᄑȯ
ʁᓝᗢᘺ૽⎊Ւ⩐ᣅѲᖛᗢᘺȯ
•
The security switch acts as the laundry declines.
Start spinning and agitating after rinsing, and the spinning will
go on after clearing the laundry declination.
᮫ᅠ⠥Ϙᅈ⎐મҚ〦Ւ̳᱿ℳᄑȯ
ᗢᘺരⳖ⠗⌉ᖛُჿཝ⳥ⱧŊᚉぜ⠥Ϙᅈരⴒሳ↧↲⌉ᖛȯ
•
It is because the sensor control the spinning times to improve
the effi ciency of spinning.
Ⳇᆯᣅဏ㋧⌉ᖛᄓ᪓Ŋ᮫ᅠЗݽӼ⌉ᖛᓝᄲ᱿ℳᄑȯ
•
When the power supply is cut off, the spinning basket stops
completely, and the lid lock will be unlocked.
ᯍᅜヅŊ⌉ᖛᐥરҚϟᔋʁ͗രŊᑨ╾⽁હ૽⡕⤟ぜȯ
•
The power supply switch won't work until the spinning basket
stops the inertial rotation.
᳅ӷ⌉ᖛᐥ᱿ඖᅩⱧϟᔋരŊヅ〦༇ሳ⬚̳ᮢȯ
•
This is to prevent overfl ow.
The water drainage pump starts automatically when the preset
alarming level is exceeded.
Ⳇᆯᣅʴ〾ᔋᝉᖛȯ
ᯍ⬢⳧⥑હ᱿ㅷ⨸ᖛ̤ᆹŊᖛᘧ⎊Ւ
啟
Ւȯ
•
This is because the water in the washer is going to to be drained off,
resulting in the entry of air into the chamber of the water drainage pump.
Ⳇᆯߌᣅᘺ⠥ᑨʑ᱿ᖛ֯૽રŊ͐ἇᖎⳖҘʴᖛᘧ᱿⌠㋤ҙȯ
•
The setting of the water level is based on the extent of the washings
in the washing machine emerging out the water surface and the
ability of the clothes roll up and down in the washing machine.
ᘺ⠥ᑨ˫⠥ỆെヮӛᖛㄇᣅͩჇ⥑હᖛ̤Ŋ᮫ჿཝ≓ჿཝ⠥ר˫ʀʁ≒Ւȯ
•
Since the clothes of chemical fi ber is comparatively light, the
water level is set accordingly low.
᮫ᅠջણ↹ℋȮ⊌⋵↹ℋᾀ⠥ⰱⱀŊߌᔍᖛ̤⥑હʬⰱ̥ȯ
•
The water level will rise during washing if the clothes being washed
have been drenched or water has been charged in advance.
ᘺᝬᠪⲿ᱿⠥ᘺ⠥ᐥʑʶ҅ᄍʴᖛᆹŊᘺ⠥ᆹᖛ̤ሳⰱ㋧ȯ
•
If there is much fl oss in "Normal" process, the effi ciency of the fl oss
filtering can be improved by increasing the water consumption,
extending washing time and setting rinse for more times.
ᐻỄʑӛⰱघፕ⃢ᆹŊרᮢဏ㋧ᖛ̤Ŋೖᘺ⠥ᆹ⿵ُ⥑હघ
ᓝᗢᘺᾀᅞᘍဏ㋧⳧ᡇፕ⃢᱿ᄓ᪓ȯ
•
The washing time may exceed predefi ned time in case of extremely
small amount of charged water.
ͧᖛ⸇ബଇ᱿ᗼʁŊᘺ⠥ᆹ⿵ሷר⋱⬢⳧⥑હᆹ⿵ȯ
About
the rinse
〦ᅠᗢᘺ
