23
Digital
Unit
Forbid
Setting
O.U.is located higher
Test Run(Cool)
7. Outdoor Unit Dip-Swtich Setting
Forbid Compressor Stop
Input Power Setting
ALL OFF: Shipment Set
Turn off all power switch before setting Dip-Switch,else Dip-Switch is of no effect.
3)In the case that power cables are connected in series, add each unit maximum current and select wires.
2)Use a shielded cable for the communication line and connect it to ground.
NOTES:
1) Follow local codes and regulations when selecting field wires.
Install a multi-pole main switch with a space of 3.5mm or more between each phase.
Follow this table setting Dip-Switch,
ALL OFF:Shipment Set
Test Run(Heat)
symbol denote the position of Dip-Switch contact joint.
ALL OFF:Shipment Set
Optional Function Setting
External Input and
Ref. Cycle No.
Setting
Communication
Setting
Capacity Setting
Pipe length Setting
Shipment
I.U.is located higher
than O.U.(>20m)
than I.U.(>25m)
RAS-4FSVN1Q
RAS-5FSVN1Q
RAS-6FSVN1Q
RAS-5FSYN1Q
RAS-6FSYN1Q
Test Run(Cool)
O.U.is located higher
Ref. cycle system No.
Communication Setting
It is necessary to set
and terminal resistor
connect to H-LINK system.
Setting Ref.cycle system No.
Setting Ref.cycle (DSW4&RSW1)
Tens Digit Setting
Single Digit Setting
Compressor Forced Stop
Output Setting
