3. Transportation and Handling
3.1 Combination of Indoor Unit and Outdoor Unit
3.2 Transportation
Max. Matching
Table 3.2 System Matching
Table 3.1 Indoor Unit Model
Below is indoor Unit combined with SET-FREE mini
FSVN1(Q)&FSYN1(Q)
Net Weight
Outdoor Unit Model
Fig.3.2 Transportation for no wooden base
If have no package to move,please protect with cloth
to
to
Min. Single
Operate Capacity
Quantity
Matching
Capacity
Min.Matching
Outdoor Unit Model
Available
Indoor Unit total Capacity must be 50% to 130% for
Outdoor Unit Nominal Capacity
Indoor unit
Capacity
to
to
to
Transport the product as close to the installation
location as practical before unpacking.
Do not put any material on the product.
Apply two lifting wires onto the outdoor unit,
when lifting it by crane.
Lifting Method
When lifting the unit, ensure a balance of
the unit, check safety and lift up smoothly.
(1) Do not remove any packing materials.
(2) Lift the unit under packing condition with
two (2) ropes, as shown in Fig. 3.1.
Fig. 3.1 Lifing Work for Transportation
Put Cloth or Paper
or paper
Do not put any foreign material into the
outdoor unit and check to ensure that none
exists in the outdoor unit before the
installation and test run. Otherwise, a fire or
failure, etc. may occur.
Nominal Capacity (HP)
1.0 1.3 1.5 1.8 2.0 2.3 2.5 3.0 4.0 5.0 6.0
In-the-Ceiling
4-Way Cassette
2-Way Cassette
Wall
Floor
Floor Concealed
Ceiling
Indoor Unit Type
HP
HP
HP
In-the-Ceiling
Low-height Type
Type
2.0
1.0
1.0
1.0
1.0
1.0
2.5
3.0
2.5
3.0
5.2
6.5
7.2
6.5
7.2
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
