Hitachi 22LD4500, Инструкция по эксплуатации, Страница: 56 / 71

55
To Store the Settings
• When the cursor is on any item which has no sub-
menu press “OK” key on the remote control to
store the settings directly.
or,
•
Press
“
”, “ ” or “ OK ” key on Store option to
store PIP Picture menu settings.
Other Features
TV Status
Programme Number , Programme Name (or
AV ), (they are displayed on the upper left of the
screen) and Sleep Timer (shows the time left on the
upper right screen if enabled). The sound indicator
and picture mode are displayed with them too.
They are displayed after programme change for 3
seconds.
P 01 Programme Number
PR 01 Programme Name (4 characters)
These OSD’s are displayed when a new programme
is entered by digit key or by pressing “ P<P ”, “-P/
CH”, “P/CH+” , “ TV ”, “ AV ” or “ ” key..
Programme Swap (P<P)
This button is used to go to the previously entered
programme again. Pressing " P<P " consecutively al-
lows to swap into two last entered programmes.
2 1 3
5 4 6
8 7 9
0
Double-digit (- / - -)
This OSD is displayed when the "Double-Digit" key
pressed in place of the programme number indicator.
P - -
In order to enter a two digit programme number you
must push both numbers within 3 seconds. If the sec-
ond number is not entered within 3 secs the display
will disappear.
Personal Preferences (PP)
All the preset values will be restored, when pressing
" PP " key.
PP
Sound Indicator
The alternatives of the indicator are Mono, Stereo,
Dual I and Dual II. This indicator is displayed under
the programme number indicator on the screen. " I-
II " key is used to select Mono or Stereo, or Dual I or
Dual II.
Mono
In Mono broadcast or in forced-mono (for stereo
broadcast).
Stereo
In Stereo broadcast.
Dual - I
If dual broadcast detected. Dual I is selected in de-
fault and also can be selected after Dual II by Remote
Control.
Dual - II
If Dual II selected by Remote Control.
Picture and Picture (PAP)
PAP layout is displayed on the screen by pressing
"
". The screen is divided into two parts at this lay-
out. DTV window is selected as the active window au-
tomatically and the border colour of the other win-
dow is blue. By pressing " OK " key the other window
can be selected and its border will become green.
Pictures are replaced with each other by pressing the
" " or " " key. Only the sound of the active window
can be heard during PAP.
To remove PAP layout from the screen, first select
DTV window as the active window and then press the
" TV/DTV " key.
1549 UK-IDTV TV-DVB-22'' TFT IB-2-(Revised - 19x27).p65 01.12.2004, 13:49 55