Hitachi 22LD4500, Инструкция по эксплуатации, Страница: 3 / 71

2
wiring the plug
If your TV is fitted with a non-rewireable plug and you need to change the fuse, you will
need to refit the fuse cover. If you lose or damage the fuse cover, do not use the plug
until you have replaced the cover with a new one. You can get one from us. Make sure
you replace the fuse cover with one which is the same colour as the markings on the
fuse.
If you have to change the plug because it is not suitable for your socket or it is
damaged, cut off the plug and fit another one following the wiring instructions below.
Please throw away the plug you have removed, as insertion into a mains socket
could cause injury.
For your own safety, read the following instructions carefully before attempting to
connect this unit to the mains.
WIRING INSTRUCTIONS
Your TV is designed to operate on 220
to 240V, 50Hz current only. Connecting it
to another power source may damage
the TV.
The wires in the mains lead are coloured
as follows.
Blue = Neutral
Brown = Live
IMPORTANT
The colours of the wires in the mains
lead from your TV may not be the same
as the coloured markings
identifying the terminals in your plug. So
please follow these instructions.
Connect the blue wire to the terminal
marked with the letter N or coloured
black.
Connect the brown wire to the terminal
marked with the letter L or coloured red.
Do not connect any wire to the other ter-
minal on the plug.
If you use a 13 Amp (BS1363) plug, you
will need a 5 Amp fuse.
If you use any other type of plug, you
will also need a 5 Amp fuse either in the
plug or on the distribution board.
WARNING
To prevent electric shocks,
r em o v e t he p l ug f ro m the
m ai ns s o c k e t be f o r e y o u
take off its cover.
BLUE
(Neutral) BROWN
(Live)
FUSE
1549 UK-IDTV TV-DVB-22'' TFT IB-2-(Revised - 19x27).p65 01.12.2004, 13:48 2