Hitachi 2000 Скачать руководство пользователя | Manualshive

Страница: 9 / 58

background image

Hardware Reference

ix

Safety Information

•

The SFPs approved for use with supported storage enclosures vary depending on

the original manufacturer of the unit. SFPs qualified for older systems might not

be approved for use with the most current storage systems. To ensure proper

operation of the High-performance NAS Platform and the storage subsystems, use

only the approved replacement parts for each system, which can be purchased by

contacting your sales representative.

•

Do not abandon backup routines. No system is completely foolproof.

Mandatory Regulations

The sections that follow outline the mandatory regulations governing the installation and

operation of the system. Adhere to these instructions to ensure that regulatory

compliance requirements are met.

International Standards

The equipment described in this manual complies with the requirements of the following

agencies and standards:

•

CSA 60950-1/UL 60950-1; EN 60950-1

•

FCC Part 15, Class A; EN 55022 Class A; EN 55024

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if it is not installed and used in accordance with the instruction

manual, might cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in

which case the users will be required to correct the interference at their own expense.
Properly shielded and grounded cables and connectors must be used in order to meet

FCC emission limits. Neither the provider nor the manufacturer is responsible for any

radio or television interference caused by using non-recommended cables and

connectors, or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate the

equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1.

The device can not cause harmful interference.

2.

The device must accept any interference received, including interference that

might cause undesired operation.

European Union (EU) Statement

This product conforms to the protection requirements of the following EU Council

Directives:

«
...
7
8
9
10
11
...
»

Содержание 2000



























































Отзывы:

Нет отзывов

Похожие инструкции для 2000

Express5800/180Ra-7

Бренд: NEC Страницы: 2

Express5800/120Rh-2

Бренд: NEC Страницы: 2

Express5800/120Rh-2

Бренд: NEC Страницы: 2

Express5800/120Rg-1

Бренд: NEC Страницы: 2

Express5800/120Rf-1

Бренд: NEC Страницы: 21

Express5800/120Ra-1

Бренд: NEC Страницы: 6

Express5800/120Mc2 series

Бренд: NEC Страницы: 2

EXPRESS5800/120Le

Бренд: NEC Страницы: 56

Express5800 320La

Бренд: NEC Страницы: 8

Express5800 120Li

Бренд: NEC Страницы: 2

Express5800 120Ed

Бренд: NEC Страницы: 29

Active Upgrade Express5800/320Fc

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 10

Express5800/120Rj-2

Бренд: NEC Страницы: 18

Express5800/120Rh-1

Бренд: NEC Страницы: 20

Bull NovaScale R620 Series

Бренд: NEC Страницы: 346

Express5800 320La

Бренд: NEC Страницы: 206

Express5800/R110j-1

Бренд: NEC Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды