manualshive.com logo in svg

Hitachi 2000, Справочник по аппаратуре

Поделиться
Скачать
Hitachi 2000 Скачать руководство пользователя страница 38

26

Hitachi High-performance NAS Platform

7. Lock the module in place by pushing inwards on the Ejection Levers until a click is 

heard.

8. Refasten the Retaining Screws.
9. Switch the power switches on the PSUs to the ON position.

Upgrading a Sever/Cluster by Replacing Modules 

This section describes how to upgrade your High-performance NAS Platform by replacing 

currently installed modules with a different model of the module (an "upgrade by 

replacement"). For instructions on how to replace failed modules to maintain a High-

performance NAS Platform, see "

Replacing a Hitachi High-performance NAS Platform™ 

Module (Non-Upgrade)," on page 25

. Note that upgrading modules in the server/cluster is 

disruptive for both stand alone server and cluster configurations. 

Warning: 

Ensure that the customer data and configurations are properly backed up 

before you begin!

Note: 

In a cluster configuration, all servers must be upgraded to the same model 

before the cluster can be restarted.

Upgrading a Series 2000 Hitachi High-performance NAS Platform to Series 
3000

To upgrade a Series 2000 Hitachi High-performance NAS Platform™ to a Series 3000:

1. Back up the server configuration (registry).

Using Web Manager, log in to the server/cluster node to be upgraded, and select 

Server Admin > Configuration Backup & Restore

.

2. Record the IP address through which the SMU is managing the server/cluster. The 

IP address is displayed in the 

Server Status Console

 with the managed server or 

cluster name.

3. Record the current firmware version.
4. If upgrading to a NIM 1200 module, perform steps 4 through 5 of the procedure 

described in "

Replacing a NIM 1060 with a NIM 1200," on page 27

. If upgrading to 

a NIM 1060 module, proceed with the next step. 

5. Replace the NIM and FSA/FSX modules. See the procedure described in "

Replacing 

a Hitachi High-performance NAS Platform™ Module (Non-Upgrade)," on page 25

.

6. Start the server. 
7. Reload the firmware (if required) and restart the server.

Once the server restarts following the replacement of the NIM and FSA/FSX 

modules:

Содержание 2000



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды