Hisun Motors HS 244-2, Руководство по введению

Страница: 50 / 65

Periodic Service
10-18
the cargo bed, mount the safety
support.

Allow engine to cool down sufficiently,
oil can be hot and can burn.
1. Park the vehicle on a flat surface, raise the
cargo bed, mount the safety support.
2. To drain the used oil, remove the drain plug
at the bottom of the transmission case and
drain the oil completely into the oil pan.
3. After draining, reinstall the drain plug.
4. After running the engine for a few minutes,
stop the engine and check the oil level
again; add oil to prescribed level.
①
Drain plug
IMPORTANT:

Do not operate the vehicle immediately after
changing the transmission fluid.

Run the engine at medium speed for a few
minutes to prevent damage to the
transmission.
■
Changing Front and Rear Axle Case Oil
1. Park the vehicle on a firm, flat and level
surface.
2. To drain the used oil, remove the drain the
oil completely into the oil pan.
3. Fill with the new oil up to the upper
notch on the dipstick.
Oil capacity for
front axle case
0.28L
（
0.072U.S.gals.
）
Oil capacity for
rear axle case
0.20L
（
0.052U.S.gals.
）
①
Front axle case drain plug
②
Rear axle case drain plug
EVERY 500 HOURS
■
Replacing Fuel Filter
Consult your local dealer for this service.
EVERY 600 HOURS
■
Adjusting Engine Valve Clearance
Consult your local dealer for this service.
EVERY 1500 HOURS
■
Checking Injection and Fuel Pump
Consult your local dealer for this service.