Hisun Motors HS 244-2, Руководство по введению

Страница: 42 / 65

Periodic Service
10-10
■
Checking engine start system
CAUTION
TO avoid personal injury

Do not allow anyone near the vehicle
while testing.

If the vehicle does not pass the test, do
not operate the vehicle.
◆
Preparation before testing
1. Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆
Test gear shift range lever safety switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “F”, “N” or
REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for this
service.
①
Range gear shift lever
■
Checking wheel bolt torque
CAUTION
To avoid personal injury

Never operate vehicle with a loose wheel
bolts.

Any time these bolts are loosened they
should be retightened to the specified
torque.

Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when new
if they are loose tighten them as follows:
①
Torque wheel bolts to 75 to 90 N.m
■
Cleaning air cleaner primary element
1. Remove the air cleaner cover and primary
element.
2. Remove the sponge material from its frame.
3. Wash the sponge material gently but
thoroughly in solvent.
4. Squeeze the excess solvent out of the
sponge material and let it dry.
5. Inspect the sponge material and replace it if
damaged.
Thoroughly apply foam air filter oil or other
quality liquid foam air filter oil (not spray type) to
the sponge material.