Before using the appliance for the first time, you
should be informed of the following tips.
Ventilation
of
appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation of heat.
For this reason, sufficient clear space should be
available around the refrigerator.
Suggest:
It is advisable for there to be at least
75mm of space from the back to the wall, at least
100mm from its top, at least 50mm from its side to
the wall and a clear space in front to allow the
doors to open 135°. As shown in follow diagrams.
Note:
This appliance performs well within the climate
class showed in the table below.
It may not work properly if being left at a
temperature above or below the indicated
range for a long period.
Stand your appliance in a dry place to avoid high
moisture.
Keep the appliance out of direct sunlight
，
rain or
frost. Stand the appliance away from heat sources
such as stoves, fires or heaters.
●
●
Leveling of appliance
For sufficient leveling and air circulating in the
lower rear section of the appliance, the bottom feet
may need to be adjusted. You can adjust them
manually by hand or by using a suitable spanner.
To allow the doors to self-close, tilt the top
backwards by about 10mm.
●
●
≤
10mm
Installing the door handles
For the convenience of transportation, the door
handles are separately provided in a plastic bag,
you can install the door handles as follows.
1. Lever screw covers on the left side of the door,
and then put them back to the plastic bag.
2. Match the handle on the left side of the door,
keeping axes of screw holes in the handle and the
door in a line, as the picture shows.
3. Fix the handle with the special screws provided
in the plastic bag.
Hisense Refrigerator
Installing
your
new
appliance
7
≥
100mm
1
8
5
5
m
m
≥ 75
mm
≥
50mm
≥
50mm
71
2
m
m
1
2
2
0
m
m
1025
mm
Climate class
Ambient temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
1
2
