Hisense Refrigerator
8
Reversing the door
The side at which the door opens can be changed,
from the right side (as supplied) to the left side, if
the installation site requires.
Warning!
When reversing the door, the appliance
must not be connected to the mains. Ensure that
the plug is removed from the mains socket.
Tools you will need:
8mm socket wrench
Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
Before you start lay the refrigerator on
its
back
in order
to
gain
access
to
the base
,
you
should
rest
it
on
soft
foam packaging
or
similar
material
to
avoid
damaging
the
backboard
of
the refrigerator
.
To
reverse
the
door
,
the following
steps
are
generally recommended
.
1. Stand
the
refrigerator
upright
.
Open
the door
to
take
out
all
door
racks
(to avoid
racks
damaged)
and
then
close
the door
.
2. Open part
①
on top of the refrigerator body
from right side and then take down part
③
and
part
④
on the door in the same way. Take down
part
②
and put it back to the plastic bag.
1
③
Upper cover of upper door
②
Upper hinge cover (right)
①
Upper cover
④
Corner
cover
3
2
3. Disconnect electrical connector
①
as well as
electrical connector
②
and then take down part
③.
3
2
1
4. Remove the screws
① ,
loose wire
② ,
and
remove part
③.
Door racks
