Hisense Refrigerator
10
12. Connect electrical connector
①
in accordance
with step 3 and then install part
② (
which is in the
plastic bag).
②
upper hinge cover(left)
①
13.Reverse part
①
by 180°and install it onto the
right corner of the door
，
then mount part
②.
(both
of which are taken down in step 2)
1
2
14. Take the reed switch out of the coping
block(part
③
in step 3)and mount it on another block
for use (which is with mark “R” in the plastic bag).
Put the coping block just removed back to the
plastic bag.
15.
,
connector
②
, and then install part
③ .
Install
part
①
connect the wire
16. Open the door, mount door racks and then
close it
.
Note
：
Be
sure
character
side
of
reed switch fits
well with coping block.
1
2
2
3
9. Screw out the upper hinge axis, turn the upper
hinge over and fix axis on it. Then place it at side
for use.
10. Exchange wires both in the left and right slots
of refrigerator body.
11. Move the door to appropriate position, adjust
part
①
and the door, Move the connecting wire
②
in the slot of the door from right to left
，
and then
fix part
①
and wire
②
by screws
③ .
(Please hold
the door by hand when installing)
