You can operate your TV by using the buttons on the front panel or on the remote control. The terminals on
the backside provide all the connections you will need to connect other equipment to your TV.
1. Place the TV on a sturdy platform (away from direct sunlight for optimal viewing).
2. Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation
may cause overheating which may damage the TV.(150mm
minimum
recommended
distance
around
covered enclosure)
Note
:
Please contact retail dealer for wall mounting.
Selecting a location for the TV
Learning about your TV
7
NO. Component Component Description
1 POWER Switch Press to turn the main power ON or OFF.
2 POWER Indicator
3 Remote sensor Receives signals from the remote control. Do not block.
4 (power standby ) button Press to turn your TV on or off (standby mode).
5 CH button Press to change the channel up.
6 CH button Press to change the channel down.
7 VOL button Press to decrease the volume.
8 VOL button Press to increase the volume.
9 SOURCE button Press to select the signal source for your TV.
10 MENU button Press to activate the on-screen display (OSD).
Red indicates standby mode. Blue shows that the unit is on.
There will be no light when the power switch is in the off position.
(NOTE: POWER Button switch location on bottom of front cabinet.)
