Installation Instructions
8
RL17G User Manual, December 2013
Step 2: Bench-test Configuration
Make sure everything works before installing into the production environment�
TIP!
Install Cable Connections
All monitors are shipped with both a 6 ft� (1�8 m) VGA video cable and 6 ft� (1�8 m) power cable,
unless longer cables were ordered in their place� If you ordered a touch screen monitor, you also
received a 6 ft� (1�8 m) USB cable and 6 ft� (1�8 m) Serial (RS-232) cable�
The cable ports are located on the rear of the monitor� Refer to the following diagram and
instructions to connect power, video, and touch screen (if applicable) to your monitor�
If using a KVM extender, please refer to the installation instructions included with the
KVM extender module� It is particularly important to bench-test the full configuration
prior to final installation� This will help to identify and troubleshoot any system issues
while configuration changes may still be easily made�
VIDEO
USB
(for Touch Screen option)
SERIAL
(RS-232)
POWER INPUT
